Hello David,
thank you for the quick response.After compiling flair and the geoviewer using the tarball installation everything works fine now.
Thanks a lot,
Moritz
________________________________________
From: David Sinuela Pastor=0A=
Sent: 08 November 2012 10:47=0A=
To: Moritz Guthoff; fluka-discuss_at_fluka.org
Subject: RE: flair on SLC6
Hello Moritz,
You may be able to solve your problem by recompiling geoviewer using the libraries installed in your system. Try to download the
source rpm and run rpmbuild as follows:
wget http://www.fluka.org/flair/flair-geoviewer-1.0-2.src.rpm
rpmbuild --rebuild flair-geoviewer-1.0-2.src.rpm
Also, to better diagnose the problem, could you post the output of flair in the terminal when you run it with "flair -X" ?
Regards,
David
Received on Thu Nov 08 2012 - 12:05:23 CET
This archive was generated by hypermail 2.2.0 : Thu Nov 08 2012 - 12:05:24 CET