Dear Fluka Experts
I just attempted to install Fluka using the latest respin
(fluka2011.2-linuxAA.tar.gz, 27Oct2012) on a PC running Ubuntu 11.10. I
followed the installation instructions as given in the 2012 Fluka Beginner's
Course, supplemented by the Fluka on-line manual. Installation seemed to go
OK, but when I attempted to run an example problem (Ex1 files downloaded
from the 2012 Fluka Beginner's Course) the log file contained only a single
line: "/home/pgl/FLUKA/flutil/rfluka: 358: /home/pgl/FLUKA/flukahp: not
found".
The only flukahp file I could find in my FLUKA folder is flukahp.map
Although I had run the "make" command, I next ran the command
"$FLUPRO/flutil/lfluka -m fluka " as described in the manual to generate (or
regenerate?) the missing flkahp file, with the following results:
pgl_at_ubuntu-q1ts:~$ cd $FLUPRO
pgl_at_ubuntu-q1ts:~/FLUKA$ $FLUPRO/flutil/lfluka -m fluka
$FLUPRO = /home/pgl/FLUKA
now linking
/home/pgl/FLUKA
g77
ar x /home/pgl/FLUKA/libflukahp.a fluka.o
g77 -m32 -O3 -g -fexpensive-optimizations -funroll-loops -fstrength-reduce
-Wall -fno-automatic -fno-silent -ffortran-bounds-check
-I/home/pgl/FLUKA/flukapro -v -o flukahp -Xlinker -Map -Xlinker flukahp.map
fluka.o -L/home/pgl/FLUKA -lflukahp
Driving: g77 -m32 -O3 -g -fexpensive-optimizations -funroll-loops
-fstrength-reduce -Wall -fno-automatic -fno-silent -ffortran-bounds-check
-I/home/pgl/FLUKA/flukapro -v -o flukahp -Xlinker -Map -Xlinker flukahp.map
fluka.o -L/home/pgl/FLUKA -lflukahp -lfrtbegin -lg2c -lm -shared-libgcc
Reading specs from /usr/lib/gcc/i486-linux-gnu/3.4.6/specs
Configured with: ../src/configure -v --enable-languages=c,c++,f77,pascal
--prefix=/usr --libexecdir=/usr/lib
--with-gxx-include-dir=/usr/include/c++/3.4 --enable-shared
--with-system-zlib --enable-nls --without-included-gettext
--program-suffix=-3.4 --enable-__cxa_atexit --enable-clocale=gnu
--enable-libstdcxx-debug --with-tune=pentium4 i486-linux-gnu
Thread model: posix
gcc version 3.4.6 (Ubuntu 3.4.6-6ubuntu3)
/usr/lib/gcc/i486-linux-gnu/3.4.6/collect2 --eh-frame-hdr -m elf_i386
-dynamic-linker /lib/ld-linux.so.2 -o flukahp crt1.o crti.o
/usr/lib/gcc/i486-linux-gnu/3.4.6/crtbegin.o -L/home/pgl/FLUKA
-L/usr/lib/gcc/i486-linux-gnu/3.4.6 -L/usr/lib/gcc/i486-linux-gnu/3.4.6
-L/usr/lib/gcc/i486-linux-gnu/3.4.6/../../../../lib
-L/usr/lib/gcc/i486-linux-gnu/3.4.6/../../.. -L/lib/../lib -L/usr/lib/../lib
-Map flukahp.map fluka.o -lflukahp -lfrtbegin -lg2c -lm -lgcc_s -lgcc -lc
-lgcc_s -lgcc /usr/lib/gcc/i486-linux-gnu/3.4.6/crtend.o crtn.o
/usr/bin/ld: cannot find crt1.o: No such file or directory
/usr/bin/ld: cannot find crti.o: No such file or directory
/usr/bin/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
I then re-ran the Ex1 problem with exactly the same result:
"/home/pgl/FLUKA/flutil/rfluka: 358: /home/pgl/FLUKA/flukahp: not found".
Any suggestions would be greatly appreciated.
Respectfully, Phil
Received on Fri Nov 16 2012 - 09:47:09 CET
This archive was generated by hypermail 2.2.0 : Fri Nov 16 2012 - 09:47:21 CET