RE: Aborted runs!

From: Francesco Cerutti <Francesco.Cerutti_at_cern.ch>
Date: Sun, 16 Jun 2013 13:08:57 +0000

<24462082.5917371371215844894.JavaMail.coremail_at_mailweb>,<4353716.5937861371261544687.JavaMail.coremail_at_mailweb>,<27913734.5986061371349008199.JavaMail.coremail_at_mailweb>
In-Reply-To: <27913734.5986061371349008199.JavaMail.coremail_at_mailweb>
Accept-Language: en-GB, en-US
Content-Language: en-GB
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [178.250.211.56]
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
Sender: owner-fluka-discuss_at_mi.infn.it

> /home/user/fluka/flukahp:not found.Is this the key to the problem?=0A=
=0A=
yes. The executable is not there, so you cannot run. It looks like somethin=
g went wrong during your installation. One has just to type "make" in the $=
FLUPRO directory (/home/user/fluka in your case) and normally flukahp is ge=
nerated (together with all the accessory post-processing codes in the subdi=
r flutil). If not, you should look at the messages following the make comma=
nd.=0A=
=0A=
Cheers=0A=
=0A=
Francesco=0A=
=0A=
________________________________________=0A=
From: yyc2011_at_mail.ustc.edu.cn [yyc2011_at_mail.ustc.edu.cn]=0A=
Sent: 16 June 2013 04:16=0A=
To: Francesco Cerutti=0A=
Subject: Re: Aborted runs!=0A=
=0A=
Dear Francesco,=0A=
=0A=
Thanks for your reply.To the question,the following are my answers.=0A=
=0A=
First,In my few seconds run,it produces fluka_* temporary directory and ran=
XX001 file.In the fluka_* temporary directory ,there is only XX001.log file=
,but no XX001.out and XX001.err fie,which is unnormal.The .log file begins =
with /home/user/fluka/flutil/rfluka:358:/home/user/fluka/flukahp:not found.=
Is this the key to the probelm?=0A=
=0A=
Second,I do not know what's a core.### real file (not a link) in your meani=
ng?=0A=
=0A=
Third,If I type the command "top" on the terminal prompt, I can not see the=
  flukahp process.=0A=
=0A=
Fourth,I am using the g77 32 bit version.=0A=
=0A=
In your view,what's my problem? What should I do?=0A=
=0A=
Yours,=0A=
Chenyuan=0A=
=0A=
=0A=
> -----Original E-mail-----=0A=
> From: "Francesco Cerutti" <Francesco.Cerutti_at_cern.ch>=0A=
> Sent Time: 2013-6-16 4:10:01=0A=
> To: "yyc2011_at_mail.ustc.edu.cn" <yyc2011_at_mail.ustc.edu.cn>=0A=
> Cc:=0A=
> Subject: RE: Re: Aborted runs!=0A=
>=0A=
> Which files are produced by your few seconds run? Is the fluka_* temporar=
y directory there? What does it contain? A core.### real file (not a link)?=
  How does the .out file end and the .log file begin? If you type the comman=
d "top" on the terminal prompt, do you see the flukahp process? Are you usi=
ng the g77 32 bit version or the gfortran 64 bit one?=0A=
>=0A=
> Ciao=0A=
>=0A=
> Francesco=0A=
>=0A=
> ________________________________________=0A=
> From: yyc2011_at_mail.ustc.edu.cn [yyc2011_at_mail.ustc.edu.cn]=0A=
> Sent: 15 June 2013 03:59=0A=
> To: Francesco Cerutti=0A=
> Subject: Re: Re: Aborted runs!=0A=
>=0A=
> Dear Franceso,=0A=
>=0A=
> Yes,you are right.If normal,the run requires a few hours for completion.B=
ut now, my problem is why the run only takes a few seconds on my machine,me=
anwhile non-completion.=0A=
>=0A=
>=0A=
> > -----Original E-mail-----=0A=
> > From: "Francesco Cerutti" <Francesco.Cerutti_at_cern.ch>=0A=
> > Sent Time: 2013-6-14 22:31:31=0A=
> > To: yyc2011_at_mail.ustc.edu.cn=0A=
> > Cc: "FLUKA discussion" <fluka-discuss_at_fluka.org>=0A=
> > Subject: Re: Aborted runs!=0A=
> >=0A=
> >=0A=
> > Dear Chenyuan,=0A=
> >=0A=
> > please keep the correspondence on the discussion list.=0A=
> > As previously suggested, your input is happily running. The point is ju=
st=0A=
> > that the run takes a while, since you asked for 10 million histories,=
=0A=
> > which on my machine require more than 6 hours for completion.=0A=
> >=0A=
> > Best regards=0A=
> >=0A=
> > Francesco=0A=
> >=0A=
> > **************************************************=0A=
> > Francesco Cerutti=0A=
> > CERN-EN/STI=0A=
> > CH-1211 Geneva 23=0A=
> > Switzerland=0A=
> > tel. ++41 22 7678962=0A=
> > fax ++41 22 7668854=0A=
> >=0A=
> > On Fri, 14 Jun 2013, yyc2011_at_mail.ustc.edu.cn wrote:=0A=
> >=0A=
> > > Dear Francesco,=0A=
> > >=0A=
> > > I am very appreciate for your reply.The attachment is my input file.T=
hanks for your time.=0A=
> > >=0A=
> > > Yours,=0A=
> > > Chenyuan=0A=
> > >=0A=
> > >=0A=
> > >> -----Original E-mail-----=0A=
> > >> From: "Francesco Cerutti" <Francesco.Cerutti_at_cern.ch>=0A=
> > >> Sent Time: 2013-6-14 16:25:13=0A=
> > >> To: yyc2011_at_mail.ustc.edu.cn=0A=
> > >> Cc: "FLUKA discussion" <fluka-discuss_at_fluka.org>=0A=
> > >> Subject: Re: Fw: Aborted runs!=0A=
> > >>=0A=
> > >>=0A=
> > >> Dear Chenyuan=0A=
> > >>=0A=
> > >> actually from what you report, one can just conclude that your input=
  is=0A=
> > >> indeed running (perhaps for a long time) but cannot guess any proble=
m.=0A=
> > >>=0A=
> > >> If any, you should send your XX.inp file=0A=
> > >>=0A=
> > >> Best=0A=
> > >>=0A=
> > >> Francesco=0A=
> > >>=0A=
> > >> **************************************************=0A=
> > >> Francesco Cerutti=0A=
> > >> CERN-EN/STI=0A=
> > >> CH-1211 Geneva 23=0A=
> > >> Switzerland=0A=
> > >> tel. ++41 22 7678962=0A=
> > >> fax ++41 22 7668854=0A=
> > >>=0A=
> > >>> -----Original E-mail-----=0A=
> > >>> From: yyc2011_at_mail.ustc.edu.cn=0A=
> > >>> Sent Time: 2013-6-14 9:56:33=0A=
> > >>> To: wangrg_at_mail.ihep.ac.cn=0A=
> > >>> Cc:=0A=
> > >>> Subject: Aborted runs!=0A=
> > >>>=0A=
> > >>>=0A=
> > >>> Dear Francesco,=0A=
> > >>>=0A=
> > >>> I am very bold to write to you.But I have a problem to seek your he=
lp.=0A=
> > >>>=0A=
> > >>> Input file has no any error apparently but I can not run this input=
  file.After I enter "rfluka XX" in the terminal,the terminal displays the f=
ollowing information.=0A=
> > >>> $TARGET_MACHINE =3D Linux=0A=
> > >>> $FLUPRO =3D /home/xsy/fluka=0A=
> > >>> $PEMF =3D /home/xsy/fluka/libec_thihecufealw_10t.pemf=0A=
> > >>>=0A=
> > >>> Initial seed copied from /home/xsy/fluka=0A=
> > >>> Running fluka in /home/xsy/flukawork/bjuc/fluka_2291=0A=
> > >>>=0A=
> > >>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D Running FLUKA for cycle # 1 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=0A=
> > >>> xsy_at_xsy-desktop:~/flukawork/bjuc$=0A=
> > >>>=0A=
> > >>> I do not know what is the problem? Please help me.=0A=
> > >>> Yours,=0A=
> > >>> chenyuan=0A=
> > >=0A=
>=0A=
=0A=
Received on Sun Jun 16 2013 - 22:52:37 CEST

This archive was generated by hypermail 2.3.0 : Sun Jun 16 2013 - 22:53:08 CEST