Re: [fluka-discuss]: Low neutron-proof materials

From: Francesco Rossetto <francesco.rossetto.3_at_studenti.unipd.it>
Date: Wed, 11 Sep 2013 17:44:55 +0200

It works! Now I can stop all the low energy neutron in a air layer! Thank
you very much Joachim!

Francesco


2013/9/10 Joachim Vollaire <joachim.vollaire_at_cern.ch>

> Hi Francesco****
>
> You can use the LOW-BIAS card to filter neutrons below 20 MeV on a region
> basis. In that case the neutron entering the region with an energy below
> the defined threshold will not be transported and its energy deposited on
> the spot. Is it what you want to do ? ****
>
> ** **
>
> Best regards****
>
> Joachim****
>
> ** **
>
> ** **
>
> *From:* owner-fluka-discuss_at_mi.infn.it [mailto:
> owner-fluka-discuss_at_mi.infn.it] *On Behalf Of *Francesco Rossetto
> *Sent:* 09 September 2013 15:25
> *To:* FLUKA mailing list
> *Subject:* [fluka-discuss]: Low neutron-proof materials****
>
> ** **
>
> Dear FLUKA users,****
>
> I'm doing a simulation involving low energy neutrons, and I would like to
> insert a material which is transparent for every particle, except for the
> low energy neutrons, or for the neutrons in general. How can I do it?****
>
> Thank you for the attention****
>
> Francesco****
>
Received on Wed Sep 11 2013 - 18:39:38 CEST