RE: RE: [fluka-discuss]: How to set jagged geometries

From: Anton Lechner <Anton.Lechner_at_cern.ch>
Date: Fri, 25 Oct 2013 12:15:36 +0000

Dear Yuan,

As Paola wrote to you about two weeks ago, 50 nm structures are probably too small for the physics models of the code. Let me quote: "the geometry you defined has layers as thin as 0.05 MICRONS. The models of the code cannot be used for such thin layers. A minimum size of about 1 micron should be kept to get meaningful results."

Cheers, Anton


________________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of yyc2011_at_mail.ustc.edu.cn [yyc2011_at_mail.ustc.edu.cn]
Sent: 25 October 2013 12:42
To: fluka-discuss_at_fluka.org
Subject: Re: RE: [fluka-discuss]: How to set jagged geometries

Dear Vasilis,

  Thanks for your reply.
  The attachment is the schematic diagram.The geometry is like this.The height of the triangle is 0.000005 centimeters.If I want to define this geometry,how should I do?
  Thanks for any suggestions.

Best Regards
YuanChen




> -----Original E-mail-----
> From: "Vasilis Vlachoudis" <Vasilis.Vlachoudis_at_cern.ch>
> Sent Time: 2013-10-25 17:43:39
> To: "yyc2011_at_mail.ustc.edu.cn" <yyc2011_at_mail.ustc.edu.cn>, "fluka-discuss_at_fluka.org" <fluka-discuss_at_fluka.org>
> Cc:
> Subject: RE: [fluka-discuss]: How to set jagged geometries
>
> Hi Yuan,
>
> could you please be more explicit what you mean by jagged maybe a drawing will help.
> Please also give a look on the course lecture on geometry and especially on Geometry II
> for use of lattices or voxels.
> Vasilis
>
> ________________________________________
> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of yyc2011_at_mail.ustc.edu.cn [yyc2011_at_mail.ustc.edu.cn]
> Sent: 25 October 2013 09:57
> To: fluka-discuss_at_fluka.org
> Subject: [fluka-discuss]: How to set jagged geometries
>
> Dear Fluka experts,
>
> I want to set jagged geometries in my simulation.But,I don't know how to set jagged geometries in the Fluka.Could you help me or could you give me any suggestions?
> Thanks for your time.Thanks for any suggestions.
>
> Best Regards
> YuanChen
>
>
>
>
Received on Fri Oct 25 2013 - 14:58:39 CEST