I did it !!!
thanks again
Luca
On 03/14/2014 02:30 PM, Vittorio Boccone wrote:
> Ciao Luca,
> the quick fix is to install them thought the Ubuntu Software Center
> install it for you. It will fix the problem and the missing
> configuration. Install flair first and flair-geoviewer later. If you
> already downloaded them just double click on them from a folder
> windows to open them in the Software Center.
> Best, V.
>
>
> On Fri, Mar 14, 2014 at 1:59 PM, luca_unimib <luca.volpe_at_mib.infn.it
> <mailto:luca.volpe_at_mib.infn.it>> wrote:
>
> Dear Vittorio,
> fluka and fleir are now instaled but Unfortunately
> flair-geoviewer is giving me problems:
>
> root_at_luca-U36SD:/home/luca/FLUKA_INST# dpkg -i
> flair-geoviewer_1.2-4_amd64.deb
> (Reading database ... 675776 files and directories currently
> installed.)
> Preparing to replace flair-geoviewer 1.2-4 (using
> flair-geoviewer_1.2-4_amd64.deb) ...
> Unpacking replacement flair-geoviewer ...
> Setting up flair-geoviewer (1.2-4) ...
> Traceback (most recent call last):
> File "<stdin>", line 3, in <module>
> File "/usr/local/lib/python2.7/lib-tk/Tkinter.py", line 39, in
> <module>
> import _tkinter # If this fails your Python may not be
> configured for Tk
> ImportError: No module named _tkinter
> dpkg: error processing flair-geoviewer (--install):
> subprocess installed post-installation script returned error exit
> status 1
> Errors were encountered while processing:
> flair-geoviewer
>
> Luca
>
>
>
>
>
> On 03/14/2014 11:40 AM, Vittorio Boccone wrote:
>>
>>
>> ---------- Forwarded message ----------
>> From: *luca volpe* <luca.volpe_at_eli-alps.hu
>> <mailto:luca.volpe_at_eli-alps.hu>>
>> Date: Fri, Mar 14, 2014 at 11:32 AM
>> Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
>> To: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org
>> <mailto:dr.vittorio.boccone_at_ieee.org>>
>>
>>
>> dear Vittorio ,
>> I have followed your instruction and I think that installation
>> worked. !!!
>> thanks a lot
>> Luca
>> to your knowledge
>> -----------------------------------------------------------------------------------------
>> luca_at_luca-U36SD:~/FLUKA$ uname -a
>> Linux luca-U36SD 3.2.0-60-generic #91-Ubuntu SMP Wed Feb 19
>> 03:54:44 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
>> luca_at_luca-U36SD:~/FLUKA$
>> ------------------------------------------------------------------------------
>> luca_at_luca-U36SD:~/FLUKA$ gfortran --version
>> GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
>> Copyright (C) 2011 Free Software Foundation, Inc.
>>
>> GNU Fortran comes with NO WARRANTY, to the extent permitted by law.
>> You may redistribute copies of GNU Fortran
>> under the terms of the GNU General Public License.
>> For more information about these matters, see the file named COPYIN
>> ------------------------------------------------------------------------------
>> luca_at_luca-U36SD:~/FLUKA$ ldd /usr/bin/gfortran
>> linux-vdso.so.1 => (0x00007fffc4bff000)
>> libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f6909410000)
>> /lib64/ld-linux-x86-64.so.2 (0x00007f69097ff000)
>>
>>
>>
>>
>> On 03/14/2014 11:11 AM, Vittorio Boccone wrote:
>>> Dear Luca,
>>> I suppose you are also trying to install Fluka on the Ubuntu
>>> 13.10 x86_64.
>>>
>>> Natanael had a different problem because the system was trying
>>> to use the 32 bit compile instead.
>>>
>>> It might be that you tried to compile the code with 32 bit (i.e.
>>> not defining the FLUFOR) and the actdline.o got created by
>>> mistake in 32 bit. In this case I would suggest you to do a "cd
>>> $FLUPRO; make clean"
>>>
>>> Are you sure that you are running on a 64 bit ubuntu?
>>> Can you post the results of
>>>
>>> > uname -a
>>> > gfortran --version
>>> > ldd /usr/bin/gfortran
>>>
>>> Best V.
>>>
>>>
>>>
>>> On Fri, Mar 14, 2014 at 10:03 AM, luca_unimib
>>> <luca.volpe_at_mib.infn.it <mailto:luca.volpe_at_mib.infn.it>> wrote:
>>>
>>> Dear Users,
>>> I am a newer.
>>> I have the same problem of Natanael,
>>>
>>> I am trying t instal the 64bit version which I have
>>> downloaded from the fluka website.
>>> fluka2011.2b-linux-gfor64bitAA
>>>
>>> the installation stop and:
>>>
>>> %%%%%%%%%%%%%%%%%%%
>>>
>>> gfortran -o actdline actdline.o
>>> /usr/bin/ld: i386 architecture of input file `actdline.o' is
>>> incompatible with i386:x86-64 output
>>> %%%%%%%%%%%%%%%%%%
>>>
>>> what I can do to solve this problem
>>> thanks a lot and nice to joint the community !
>>> Ciao
>>> Luca
>>>
>>>
>>> On 03/14/2014 07:17 AM, Vittorio Boccone wrote:
>>>> Hi Natanael,
>>>> then you clearly missed the definition of the FLUFOR (and
>>>> if need the additional GFORFLU in case is needed) as
>>>> specified in the installation instructions
>>>>
>>>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>>>
>>>> * FLUFOR (optional): containing the compiler type
>>>> (*gfortran* or *g77*) which must be coherent with the
>>>> architecture of the package you downloaded.
>>>> If you work on *bash* do:
>>>> > export FLUFOR=g77
>>>> or
>>>> > export FLUFOR=gfortran
>>>>
>>>> Best V.
>>>>
>>>>
>>>> On Fri, Mar 14, 2014 at 7:17 AM, Vittorio Boccone
>>>> <dr.vittorio.boccone_at_ieee.org
>>>> <mailto:dr.vittorio.boccone_at_ieee.org>> wrote:
>>>>
>>>> Hi Natanael,
>>>> then you clearly missed the definition of the FLUFOR
>>>> (and if need the additional GFORFLU in case is needed)
>>>> as specified in the installation instructions
>>>>
>>>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>>>
>>>> * FLUFOR (optional): containing the compiler type
>>>> (*gfortran* or *g77*) which must be coherent with
>>>> the architecture of the package you downloaded.
>>>> If you work on *bash* do:
>>>>
>>>> > export FLUFOR=g77
>>>>
>>>> or
>>>>
>>>> > export FLUFOR=gfortran
>>>>
>>>> Best V.
>>>>
>>>>
>>>> On Thu, Mar 13, 2014 at 10:27 PM, <nm00219_at_surrey.ac.uk
>>>> <mailto:nm00219_at_surrey.ac.uk>> wrote:
>>>>
>>>>
>>>> Dear Vittorio,
>>>>
>>>> Thank you so much for the quick reply!
>>>> No not at all I just want the simple x64
>>>> installation no 32 bits. I believe I have gfortran
>>>> already. But I made double sure I got the 64 bits
>>>> version in both cases I don't understand...
>>>>
>>>> Best,
>>>> Nat
>>>>
>>>> Sent from Samsung Mobile
>>>>
>>>>
>>>> -------- Original message --------
>>>> From: Vittorio Boccone
>>>> Date:13/03/2014 9:18 PM (GMT+00:00)
>>>> To: "Mota NCD Mr (PG/T - Physics)"
>>>> ,fluka-discuss_at_fluka.org
>>>> <mailto:fluka-discuss_at_fluka.org>
>>>> Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits
>>>> installation
>>>>
>>>> Hi Natanael,
>>>> I suggested you to install the 64 bit version with
>>>> gfortran instead, you are still trying to compile
>>>> the 32 bit version on a 64 bit machine. This can be
>>>> done but if you want to compile/link 32-bit
>>>> packages, you need to install a minimal set of
>>>> 32-bit packages (at least what in the Scientific
>>>> linux and Fedora are the packages called
>>>> glibc-devel.i686 libgcc.i686)
>>>>
>>>> /usr/bin/ld: cannot find crt1.o: No such file or
>>>> directory -> means that the compat lib are not
>>>> complete
>>>>
>>>> I suggested you to try the gfortran version as it
>>>> works out of the box (you only have to install
>>>> gfortran with a sudo apt-get install gfortran)
>>>>
>>>> Do you really need the 32 bit version for some
>>>> legacy application?
>>>>
>>>> Best,
>>>> V.
>>>>
>>>>
>>>> On Thu, Mar 13, 2014 at 8:40 PM,
>>>> <nm00219_at_surrey.ac.uk
>>>> <mailto:nm00219_at_surrey.ac.uk>> wrote:
>>>>
>>>> Dear Vittorio,
>>>>
>>>>
>>>> I did as you said, and I faced another error.
>>>> Please check the log.
>>>>
>>>>
>>>> Best,
>>>>
>>>> Nat
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> *From:* Vittorio Boccone
>>>> <dr.vittorio.boccone_at_ieee.org
>>>> <mailto:dr.vittorio.boccone_at_ieee.org>>
>>>> *Sent:* Wednesday, March 05, 2014 11:44 PM
>>>> *To:* Mota NCD Mr (PG/T - Physics); Mary Chin
>>>> *Cc:* fluka-discuss_at_fluka.org
>>>> <mailto:fluka-discuss_at_fluka.org>
>>>> *Subject:* Re: [fluka-discuss]: Ubunto 13.10 64
>>>> bits installation
>>>> Dear Natanael,
>>>> form the short log you sent it seems you
>>>> downloaded the 32bit (g77) version of the code
>>>> while you are trying to compile it in 64 bit
>>>> mode with gfortran.
>>>>
>>>> > gfortran -o actdline actdline.o
>>>> > /usr/bin/ld: i386 architecture of input file
>>>> `actdline.o' is incompatible with i386:x86-64
>>>> output
>>>>
>>>> For the installation/download refer to
>>>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>>>
>>>> Please try to download and compile this instead
>>>> https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz
>>>>
>>>> Best,
>>>> V.
>>>>
>>>>
>>>> On Wed, Mar 5, 2014 at 6:23 PM,
>>>> <nm00219_at_surrey.ac.uk
>>>> <mailto:nm00219_at_surrey.ac.uk>> wrote:
>>>>
>>>> Dear Sir/Madam,
>>>>
>>>>
>>>> I have been trying to install fluka and
>>>> flair on my 64 bits Ubunto 13.10 system. I
>>>> have already acquired g77 ( just in
>>>> case) and gfortran along with some flair
>>>> packages, but whenever I hit make for
>>>> the fluka installation it doesn't compile
>>>> properly. I've been guiding myself with
>>>> this site
>>>> https://twiki.cern.ch/twiki/bin/view/Sandbox/HCALRadiationProject
>>>> and the readme file, with little sucess due
>>>> to my system's architecture and operating
>>>> system. The bash verbose is attached.
>>>>
>>>> I would deeply appreciate a user friendly
>>>> set of instructions from step 0.
>>>>
>>>> Best regards,
>>>> Natanael Mota
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> --------------------------------------------------------
>>> Luca Volpe
>>> --Centre Lasers Intenses et Applications Université Bordeaux 1
>>> 351, Cours de la Liberation 33405 Talence cedex, (Fr)
>>> +33(0)5 40 40 37 62 <tel:%2B33%280%295%2040%2040%2037%2062>;+33(0)6 11 97 09 14 <tel:%2B33%280%296%2011%2097%2009%2014>;
>>> volpe_at_celia.u-bordeaux1.fr <mailto:volpe_at_celia.u-bordeaux1.fr>
>>> --Università di Milano-Bicocca
>>> Piazza della Scienza 3, 20133 Milano (It)
>>> +39 0264482351 <tel:%2B39%200264482351> ;+39-3402940744 <tel:%2B39-3402940744>
>>> luca.volpe_at_mib.infn.it <mailto:luca.volpe_at_mib.infn.it>
>>> --------------------------------------------------------
>>>
>>>
>>
>>
>
>
> --
> --------------------------------------------------------
> Luca Volpe
> --Centre Lasers Intenses et Applications Université Bordeaux 1
> 351, Cours de la Liberation 33405 Talence cedex, (Fr)
> +33(0)5 40 40 37 62 <tel:%2B33%280%295%2040%2040%2037%2062>;+33(0)6 11 97 09 14 <tel:%2B33%280%296%2011%2097%2009%2014>;
> volpe_at_celia.u-bordeaux1.fr <mailto:volpe_at_celia.u-bordeaux1.fr>
> --Università di Milano-Bicocca
> Piazza della Scienza 3, 20133 Milano (It)
> +39 0264482351 <tel:%2B39%200264482351> ;+39-3402940744 <tel:%2B39-3402940744>
> luca.volpe_at_mib.infn.it <mailto:luca.volpe_at_mib.infn.it>
> --------------------------------------------------------
>
>
--
--------------------------------------------------------
Luca Volpe
--Centre Lasers Intenses et Applications Université Bordeaux 1
351, Cours de la Liberation 33405 Talence cedex, (Fr)
+33(0)5 40 40 37 62; +33(0)6 11 97 09 14;
volpe_at_celia.u-bordeaux1.fr
--Università di Milano-Bicocca
Piazza della Scienza 3, 20133 Milano (It)
+39 0264482351 ;+39-3402940744
luca.volpe_at_mib.infn.it
--------------------------------------------------------
Received on Fri Mar 14 2014 - 16:31:03 CET