Fwd: [fluka-discuss]: Ubunto 13.10 64 bits installation

From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
Date: Fri, 14 Mar 2014 11:38:21 +0100

---------- Forwarded message ----------
From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
Date: Fri, Mar 14, 2014 at 11:11 AM
Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
To: luca_unimib <luca.volpe_at_mib.infn.it>


Dear Luca,
 I suppose you are also trying to install Fluka on the Ubuntu 13.10 x86_64.

Natanael had a different problem because the system was trying to use the
32 bit compile instead.

It might be that you tried to compile the code with 32 bit (i.e. not
defining the FLUFOR) and the actdline.o got created by mistake in 32 bit.
In this case I would suggest you to do a "cd $FLUPRO; make clean"

Are you sure that you are running on a 64 bit ubuntu?
Can you post the results of

> uname -a
> gfortran --version
> ldd /usr/bin/gfortran

Best V.




On Fri, Mar 14, 2014 at 10:03 AM, luca_unimib <luca.volpe_at_mib.infn.it>wrote:

> Dear Users,
> I am a newer.
> I have the same problem of Natanael,
>
> I am trying t instal the 64bit version which I have downloaded from the
> fluka website.
> fluka2011.2b-linux-gfor64bitAA
>
> the installation stop and:
>
> %%%%%%%%%%%%%%%%%%%
>
> gfortran -o actdline actdline.o
> /usr/bin/ld: i386 architecture of input file `actdline.o' is incompatible
> with i386:x86-64 output
> %%%%%%%%%%%%%%%%%%
>
> what I can do to solve this problem
> thanks a lot and nice to joint the community !
> Ciao
> Luca
>
>
> On 03/14/2014 07:17 AM, Vittorio Boccone wrote:
>
> Hi Natanael,
> then you clearly missed the definition of the FLUFOR (and if need the
> additional GFORFLU in case is needed) as specified in the installation
> instructions
>
> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>
> - FLUFOR (optional): containing the compiler type (*gfortran* or *g77*)
> which must be coherent with the architecture of the package you downloaded.
> If you work on *bash* do:
>
> > export FLUFOR=g77
>
> or
>
> > export FLUFOR=gfortran
>
>
> Best V.
>
>
> On Fri, Mar 14, 2014 at 7:17 AM, Vittorio Boccone <
> dr.vittorio.boccone_at_ieee.org> wrote:
>
>> Hi Natanael,
>> then you clearly missed the definition of the FLUFOR (and if need the
>> additional GFORFLU in case is needed) as specified in the installation
>> instructions
>>
>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>
>> - FLUFOR (optional): containing the compiler type (*gfortran* or *g77*)
>> which must be coherent with the architecture of the package you downloaded.
>> If you work on *bash* do:
>>
>> > export FLUFOR=g77
>>
>> or
>>
>> > export FLUFOR=gfortran
>>
>>
>> Best V.
>>
>>
>> On Thu, Mar 13, 2014 at 10:27 PM, <nm00219_at_surrey.ac.uk> wrote:
>>
>>>
>>> Dear Vittorio,
>>>
>>> Thank you so much for the quick reply!
>>> No not at all I just want the simple x64 installation no 32 bits. I
>>> believe I have gfortran already. But I made double sure I got the 64 bits
>>> version in both cases I don't understand...
>>>
>>> Best,
>>> Nat
>>>
>>> Sent from Samsung Mobile
>>>
>>>
>>> -------- Original message --------
>>> From: Vittorio Boccone
>>> Date:13/03/2014 9:18 PM (GMT+00:00)
>>> To: "Mota NCD Mr (PG/T - Physics)" ,fluka-discuss_at_fluka.org
>>> Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
>>>
>>> Hi Natanael,
>>> I suggested you to install the 64 bit version with gfortran instead, you
>>> are still trying to compile the 32 bit version on a 64 bit machine. This
>>> can be done but if you want to compile/link 32-bit packages, you need
>>> to install a minimal set of 32-bit packages (at least what in the
>>> Scientific linux and Fedora are the packages called glibc-devel.i686
>>> libgcc.i686)
>>>
>>> /usr/bin/ld: cannot find crt1.o: No such file or directory -> means
>>> that the compat lib are not complete
>>>
>>> I suggested you to try the gfortran version as it works out of the box
>>> (you only have to install gfortran with a sudo apt-get install gfortran)
>>>
>>> Do you really need the 32 bit version for some legacy application?
>>>
>>> Best,
>>> V.
>>>
>>>
>>> On Thu, Mar 13, 2014 at 8:40 PM, <nm00219_at_surrey.ac.uk> wrote:
>>>
>>>> Dear Vittorio,
>>>>
>>>>
>>>> I did as you said, and I faced another error. Please check the log.
>>>>
>>>>
>>>> Best,
>>>>
>>>> Nat
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>> *From:* Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
>>>> *Sent:* Wednesday, March 05, 2014 11:44 PM
>>>> *To:* Mota NCD Mr (PG/T - Physics); Mary Chin
>>>> *Cc:* fluka-discuss_at_fluka.org
>>>> *Subject:* Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
>>>>
>>>> Dear Natanael,
>>>> form the short log you sent it seems you downloaded the 32bit (g77)
>>>> version of the code while you are trying to compile it in 64 bit mode with
>>>> gfortran.
>>>>
>>>> > gfortran -o actdline actdline.o
>>>> > /usr/bin/ld: i386 architecture of input file `actdline.o' is
>>>> incompatible with i386:x86-64 output
>>>>
>>>> For the installation/download refer to
>>>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>>>
>>>> Please try to download and compile this instead
>>>> https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz
>>>>
>>>> Best,
>>>> V.
>>>>
>>>>
>>>> On Wed, Mar 5, 2014 at 6:23 PM, <nm00219_at_surrey.ac.uk> wrote:
>>>>
>>>>> Dear Sir/Madam,
>>>>>
>>>>>
>>>>> I have been trying to install fluka and flair on my 64 bits Ubunto
>>>>> 13.10 system. I have already acquired g77 ( just in case) and gfortran
>>>>> along with some flair packages, but whenever I hit make for the fluka
>>>>> installation it doesn't compile properly. I've been guiding myself with
>>>>> this site
>>>>> https://twiki.cern.ch/twiki/bin/view/Sandbox/HCALRadiationProject
>>>>> and the readme file, with little sucess due to my system's architecture and
>>>>> operating system. The bash verbose is attached.
>>>>>
>>>>> I would deeply appreciate a user friendly set of instructions from
>>>>> step 0.
>>>>>
>>>>> Best regards,
>>>>> Natanael Mota
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>
>
> --
> --------------------------------------------------------
> Luca Volpe
> --Centre Lasers Intenses et Applications UniversitÚ Bordeaux 1
> 351, Cours de la Liberation 33405 Talence cedex, (Fr)+33(0)5 40 40 37 62; +33(0)6 11 97 09 14;volpe_at_celia.u-bordeaux1.fr
> --UniversitÓ di Milano-Bicocca
> Piazza della Scienza 3, 20133 Milano (It)+39 0264482351 ;+39-3402940744luca.volpe_at_mib.infn.it
> --------------------------------------------------------
>
>
Received on Fri Mar 14 2014 - 12:50:17 CET

This archive was generated by hypermail 2.3.0 : Fri Mar 14 2014 - 12:50:18 CET