Thanks for mentioning it Walid. I've corrected the page.
V.
________________________________
From: walid.dridi78_at_gmail.com [walid.dridi78_at_gmail.com] on behalf of Walid DRIDI [walid.dridi_at_cnstn.rnrt.tn]
Sent: 13 June 2014 12:52
To: Vasilis Vlachoudis
Cc: fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: USRBIN Plot with FLAIR: *.bnn not created
Dear Vasilis,
Thank you very much for your response.
I know that the files _sum.lis or _tab.lis for others cards : USRBDX, USRTRACK,...
I am running from FLUPIX and in the Virtual Machine configuration I putted 800 MB of memory > 768 MB recommended as done in this link :
http://www.fluka.org/content/tools/flupix/
I reconfigured the machine with 1056 MB of Base Memory. Now the data processing worked very well for USRBIN card.
Thanks again.
2014-06-13 8:26 GMT+01:00 Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch<mailto:Vasilis.Vlachoudis_at_cern.ch>>:
Hi Walid,
I've just run the example.inp, and the data processing worked ok.
Just be careful there is no _sum.lis or _tab.lis for the USRBIN's for the plotting the binary file is used
which is later processed with gplevbin or usbmax to create the appropriate projections.
Please verify that:
1. You are not running in the $FLUPRO folder. Copy in a clean folder the example.inp
2. You have enough disk space
3. If you are running from FLUPIX that you have set enough memory >1Gb and no other process is running
Cheers
Vasilis
________________________________
From: owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it> [owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it>] on behalf of Walid DRIDI [walid.dridi_at_cnstn.rnrt.tn<mailto:walid.dridi_at_cnstn.rnrt.tn>]
Sent: 12 June 2014 22:44
To: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: USRBIN Plot with FLAIR: *.bnn not created
Dear Vasilis,
I am trying to run an example given in the directory $FLUPRO. 'example.inp'
after running, I would like to reproduce the plot for all cards.
At the phase of procceessing data "Data merging",
for all cards, the files *_sum.lis and *_tab.lis are created and I can see the plots.
execpt for USRBIN card we have a message that the file, "example_50.bnn" is not created.
I know that we can do this manually, for USRBIN card the user routine:
$FLUPRO/flutil/usbsuw and after $FLUPRO/flutil/usbrea.
I am checking if FLAIR can do the first step for the creation of the binairy file of USRBIN card or not, with usbsuw tool? by seeing the "flair:Output" window.
I noticed that Flair can not procceed this step with success.
Thanks in advance and Best regards
--
===============================================
Walid DRIDI, Eng & PhD
Assistant Professor / Researcher
National Center for Nuclear Science and Technology (CNSTN)
Sidi Thabet Technopark 2020 Ariana Tunisia
EMAIL : walid.dridi_at_cnstn.rnrt.tn<mailto:walid.dridi_at_cnstn.rnrt.tn>
--
===============================================
Walid DRIDI, Eng & PhD
Assistant Professor
National Center for Nuclear Science and Technology (CNSTN)
Sidi Thabet Technopark 2020 Ariana Tunisia
Cell Phone : (+216) 95 14 04 97
EMAIL : walid.dridi_at_cnstn.rnrt.tn<mailto:walid.dridi_at_cnstn.rnrt.tn>
Received on Fri Jun 13 2014 - 15:35:07 CEST