Thank you Joachim, this is what I was looking for.
Cheers,
Nkanyiso
On Wed, Jun 10, 2015 at 5:27 PM, Joachim Vollaire <joachim.vollaire_at_cern.ch>
wrote:
> Hi Nkanyiso,
>
> Just to be sure, you want to use a radioactive isotope as a volumic source
> ? Not a particle beam, is this correct ?
>
>
>
> If this is the case, in the example below I am defining a cylindrical
> shape Tl-204 source (you can overlay the source to a material in the
> geometry if the radionuclides are within a matrix material):
>
>
>
> BEAM
> 1.0ISOTOPE
>
> BEAMPOS 0.0 0.15 0.0 0.24 0.0
> CYLI-VOL
>
> BEAMPOS 0.0 0.0
> -0.125
>
> HI-PROPE 81. 204.
>
> *
>
> Activate the decay in semi-analogue mode
>
>
>
> RADDECAY 2.0
>
> *
>
>
>
> Use -1.0 for the card below as you are in semi-analogue mode
>
>
>
> DCYSCORE -1.0 0. 0. DR-All DR-All
> USRBIN
>
> *
>
> *
>
> USRBIN 10.0 DOSE-EQ -45.0 80.0 0.4
> 80.0DR-All
>
> USRBIN -80.0 -0.4 -80.0 160.0 1.0 160.0&
>
> *
>
>
>
> Your results will be normalized per decay of the radionuclides defined
> with the HI-PROPE card. If you have a xxx Bq source then you have to
> normalize the score quantities to your source activity
>
> Hoping this help
>
> Joachim
>
>
>
>
>
> *From:* NKANYISO ROBERT Mantengu [mailto:3477531_at_myuwc.ac.za]
> *Sent:* 10 June 2015 12:03
> *To:* fluka-discuss_at_fluka.org
> *Cc:* Joachim Vollaire
> *Subject:* Definition of Radioactive Target
>
>
>
> Dear FLUKA users,
>
> I have a problem with defining the radioactive target, where I will just
> measure the activity of the target without hitting it with a beam.
>
> Any idea will be appreciated.
>
> Regards
>
> N.R Mantengu
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Jun 11 2015 - 13:24:44 CEST