RE: [fluka-discuss]: USRBIN 1D projection plot

From: Stefan Roesler <Stefan.Roesler_at_cern.ch>
Date: Mon, 7 Sep 2015 09:22:44 +0000

Dear Hamideh

Could you please post input and flair file? The question is difficult to understand from your below description.

Cheers
Stefan

From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Hamideh Jalali
Sent: 07 September 2015 06:59
To: fluka-discuss <fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: USRBIN 1D projection plot

Dear FLUKA Experts

In my problem an inclined Si target has been placed in a room (x:-150 to 150, y:-50 to 250, z: 0 to 1000 cm) and has symmetry to the lateral walls. The beam(produced gas bremsstrahlung) is in z direction with x and y coordinate of 0.
I would like to score dose equivalent along the room behind lateral walls in near beam height. To have so, I used 1D projection plot of USRBIN. I expected to have the same results in both sides of the room but the plots are completely different. They are attached.
Please guide me to know where I am wrong.

Kind Regards
Hamideh

__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Sep 07 2015 - 12:48:47 CEST

This archive was generated by hypermail 2.3.0 : Mon Sep 07 2015 - 12:48:48 CEST