Dear Fluka Experts,
is there a way to start Fluka Simulation with a certain number of particles
(e.g. 100 000 primaries), then call the source.f Routine and after some
calculations inside assign another number of primaries (e.g 99 960)?
Regards
Yuri
2015-09-17 13:15 GMT+02:00 Yuri Simeonov <yuri.simeonov_at_gmail.com>:
> Thank you very much!
>
> 2015-09-17 11:07 GMT+02:00 Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch>
> :
>
>> Hi Yuri,
>>
>> In the (CASLIM) you have the number of particles to simulate
>> NCASES is the number of particles in the START card WHAT(1) (modulo 1e9)
>> if you use more than 1e9 particles you need also the Mcases
>>
>> Cheers
>> Vasilis
>>
>> ------------------------------
>> *From:* owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it]
>> on behalf of Yuri Simeonov [yuri.simeonov_at_gmail.com]
>> *Sent:* 16 September 2015 19:19
>> *To:* fluka-discuss_at_fluka.org
>> *Subject:* [fluka-discuss]: Primary particles
>>
>> Dear Fluka experts,
>>
>> I am using the source.f Routine und need to know the number of primary
>> particles (WHAT (1) in the Start Card) inside the Routine. Is there a
>> variable I can use?
>>
>> Regards
>> Yuri
>>
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Sep 21 2015 - 20:36:50 CEST