Re: [fluka-discuss]: Geometry axes and output of FLAIR

From: M. ARIF EFENDI <5810220008_at_email.psu.ac.th>
Date: Wed, 30 Sep 2015 03:47:45 +0000

Dear Mr. Thiago Viana Miranda Lima,


Thank you so much for your kind reply.


1) but what the vertical direction in FLUKA? z axes or y axes? and is that fluka use gravity calculation for simulate?

2) I already use USRBIN card, but didn't found the data when try to merge it (I attach the picture). I use 21 bin. can you explain to me about BIN and ASC in unit?

3) Can you send to me the courses materials (pdf) that related to DICOM? I use the latest FLAIR but didn't found the DICOM

I attach in this email my .flair and .inp files


Best Regards



________________________________
From: Thiago Viana Miranda Lima <thiago.vmlima_at_cern.ch>
Sent: Tuesday, September 29, 2015 5:40 PM
To: M. ARIF EFENDI
Cc: Vasilis Vlachoudis; fluka-discuss_at_fluka.org; tripop.b_at_psu.ac.th
Subject: Re: [fluka-discuss]: Geometry axes and output of FLAIR

Dear Mr Arif Efendi,

Answering your questions:

1) The orientation you can chose whatever you want as you can define the orientation of the beam and it should follow the same as the linac head.

2) What you are looking for is a card called usrbin, but I would suggest you to have a look at the manual for how to use the card. And another suggestion is to look at past courses materials as it will examples of interesting tools that you may want to use for example importing DICOM files to fluka and visualising then. There should also have information on visualisation of usrbin with flair.

Best wishes
Thiago

On 29 Sep 2015, at 10:44, M. ARIF EFENDI <5810220008_at_email.psu.ac.th<mailto:5810220008_at_email.psu.ac.th>> wrote:


Dear FLUKA expert,

My name is M. Arif Efendi.
I'm studying in prince of songkla university at nuclear physics.

I will use FLAIR for my research.
My research is simulation of photon dose in medical LINAC.
I am quite new fluka user.

I have two questions for my problem.
First questions is about geometry axes in fluka. I want to simulate the head of linac.
The beam start in the top and come to the bottom (vertical direction).
I make in my simulation geometry that it use z direction. Is that correct to define the vertical direction as z axes?
I attach in this email my .flair and .inp file.

The second questions is how to see the output file and scoring the dose in flair?
I want to get the plot about relative percent dose as the distance (cm) and percentage depth dose as depth (cm).

Your help is really my expectation.

Best Regards
M. Arif Efendi


<prelimenary.flair><prelimenary.inp>





__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Wed Sep 30 2015 - 07:26:19 CEST