[fluka-discuss]: R: Flair - USRBIN plotting error

From: Firpo Gabriele <Gabriele.Firpo_at_ann.ansaldo.it>
Date: Fri, 16 Oct 2015 14:58:19 +0000

Dear Joachim,

Here you can find a complete set of input, source and output file to reproduce another similar error example that I found. Please discard some name inconsistences (for example: EneDep is the name of the USRBIN, but neutron particles are requested actually) in the input file, since they are refuses of many tries.
Please note that, in order to perform the run, the source_spectrum.f file must be compiled (I did it in FLAIR) in order to let FLUKA read the neutron source spectrum reported in the "spectrum.dat" file.

In particular, I ran the case and tried to plot the USRBIN in the plane y=0 and the gnuplot error (Gnuplot_Error.txt) appeared.
In the same time, the file "Ni_50_plot.dat" was created: I assume that it lists the USRBIN values that should be plotted by gnuplot, and they are all non-zeroes...

Regards,

[S_ORANGE_Logo_Ansaldo_Nucleare_2014]



Gabriele Firpo
UnitÓ Reattori e Sicurezza - Reactor and Safety Engineer





C.so F.M. Perrone, 25

16152 Genova - Italia

Ph: +39.010.655.83.42

www.ansaldonucleare.it<http://www.ansaldonucleare.it/>

gabriele.firpo_at_ann.ansaldo.it<mailto:gabriele.firpo_at_ann.ansaldo.it>



Da: Joachim Vollaire [mailto:joachim.vollaire_at_cern.ch]
Inviato: venerdý 16 ottobre 2015 14:26
A: Firpo Gabriele; fluka-discuss_at_fluka.org
Oggetto: RE: Flair - USRBIN plotting error

Dear Gabriele
Could you send your input and the necessary outputs to reproduce the problem with flair. Are you sure that your USRBIN data are not all zero in the area where you are plotting or that the geometry that you overlay on the colour plot is not empty ?

Cheers
Joachim

From: owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it> [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Firpo Gabriele
Sent: 14 October 2015 11:20
To: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: Flair - USRBIN plotting error

Dear all,

Sometimes it happens to me that, when I try to plot an USRBIN in flair, a geometry error like the one attached appears.
Could you please tell me why?

Regards,

[S_ORANGE_Logo_Ansaldo_Nucleare_2014]



Gabriele Firpo
UnitÓ Reattori e Sicurezza - Reactor and Safety Engineer





C.so F.M. Perrone, 25

16152 Genova - Italia

Ph: +39.010.655.83.42

www.ansaldonucleare.it<http://www.ansaldonucleare.it/>

gabriele.firpo_at_ann.ansaldo.it<mailto:gabriele.firpo_at_ann.ansaldo.it>






P
Prima di stampare questa comunicazione consideratene, per favore, l'impatto ambientale
Please consider the environment before printing this email.

________________________________

Il presente messaggio ed ogni suo allegato sono da intendersi inviati esclusivamente agli effettivi destinatari e potrebbero essere soggetti a restrizioni legali. Se avete ricevuto questo messaggio per errore Vi invitiamo a darne immediata notifica al destinatario e cancellarlo dal Vostro sistema. Qualsiasi altro uso di questo messaggio da parte Vostra Ŕ strettamente proibito. Grazie per la Vostra collaborazione.

This e-mail, and any file attached to it, is meant for only the intended recipient of the transmission and may be a communication privileged by law. If you have received it in error, please notify the sender immediately and delete the original from your system. Any other use of this e-mail by you is prohibited. Thank you in advance for your cooperation.



P
Prima di stampare questa comunicazione consideratene, per favore, l'impatto ambientale
Please consider the environment before printing this email.

________________________________

Il presente messaggio ed ogni suo allegato sono da intendersi inviati esclusivamente agli effettivi destinatari e potrebbero essere soggetti a restrizioni legali. Se avete ricevuto questo messaggio per errore Vi invitiamo a darne immediata notifica al destinatario e cancellarlo dal Vostro sistema. Qualsiasi altro uso di questo messaggio da parte Vostra Ŕ strettamente proibito. Grazie per la Vostra collaborazione.

This e-mail, and any file attached to it, is meant for only the intended recipient of the transmission and may be a communication privileged by law. If you have received it in error, please notify the sender immediately and delete the original from your system. Any other use of this e-mail by you is prohibited. Thank you in advance for your cooperation.



P
Prima di stampare questa comunicazione consideratene, per favore, l'impatto ambientale
Please consider the environment before printing this email.

________________________________

Il presente messaggio ed ogni suo allegato sono da intendersi inviati esclusivamente agli effettivi destinatari e potrebbero essere soggetti a restrizioni legali. Se avete ricevuto questo messaggio per errore Vi invitiamo a darne immediata notifica al destinatario e cancellarlo dal Vostro sistema. Qualsiasi altro uso di questo messaggio da parte Vostra Ŕ strettamente proibito. Grazie per la Vostra collaborazione.

This e-mail, and any file attached to it, is meant for only the intended recipient of the transmission and may be a communication privileged by law. If you have received it in error, please notify the sender immediately and delete the original from your system. Any other use of this e-mail by you is prohibited. Thank you in advance for your cooperation.






__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

image001.jpg
(image/jpeg attachment: image001.jpg)

image002.png
(image/png attachment: image002.png)

Received on Fri Oct 16 2015 - 19:13:56 CEST

This archive was generated by hypermail 2.3.0 : Fri Oct 16 2015 - 19:14:02 CEST