Please also check that you version is not obsolete (too old) by looking at the end of the .out file(s) for those lines
**** This version is obsolete and/or ****
**** you are not allowed to use FLUKA ****
**** Please contact the FLUKA list ****
**** or look for an updated version ****
**** at
http://www.fluka.org ****
If this is the case, download a new one.
There are also very nice slides for beginners on the course page of the website:
http://www.fluka.org/fluka.php?id=courses&sub=ALL&mm2=1 <
http://www.fluka.org/fluka.php?id=courses&sub=ALL&mm2=1>
Best,
V.
> On 06 Mar 2016, at 01:19, Vittorio Boccone <dr.vittorio.boccone_at_ieee.org> wrote:
>
> Hi are you sure to you are running Fluka through rfluka?
> Plus you should copy the example somewhere else then in the $FLUPRO directory.
>
> Best,
> Vittorio
>
>> :~/Software/fluka-list$ $FLUPRO/flutil/rfluka -N 0 -M 5 example.inp
>> $TARGET_MACHINE = Linux
>> $FLUPRO = /home/vitb/Software/fluka
>>
>> Initial seed copied from /home/vitb/Software/fluka
>> Running fluka in /home/vitb/Software/fluka-list/fluka_26832
>>
>> ======================= Running FLUKA for cycle # 1 =======================
>>
>> Removing links
>> Removing temporary files
>> Saving output and random number seed
>> Saving additional files generated
>> Moving fort.47 to /home/vitb/Software/fluka-list/example001_fort.47
>> Moving fort.48 to /home/vitb/Software/fluka-list/example001_fort.48
>> Moving fort.49 to /home/vitb/Software/fluka-list/example001_fort.49
>> Moving fort.50 to /home/vitb/Software/fluka-list/example001_fort.50
>> Moving fort.51 to /home/vitb/Software/fluka-list/example001_fort.51
>>
>> ======================= Running FLUKA for cycle # 2 =======================
>>
>
>
>
>
>
>> Removing links
>> Removing temporary files
>> Saving output and random number seed
>>
>
>> On 04 Mar 2016, at 15:30, 彭猛 <pengm09_at_lzu.edu.cn> wrote:
>>
>> Dear FLUKA experters:
>>
>> I encoutered some question when I began to learn fluka .
>> I had installed the fluka in my computer successfully according to official manual, the program produced the default executable called flukahp. the terminal window had the following error message:
>> "ERROR: Random seed '/home/ciae/fluka_work/ranexample002' do not exist! " when I run "example.inp" supported by the fluka package. the fluka version is fluka2011.2c-linux-gfor64bitAA.tar.gz , the linux opera system is Ubuntu15.10, 64-bit
>> If you know the reason, Please give me the answer.
>> thank.
>>
>> __________________________________________________________________________
>> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
>>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Mar 06 2016 - 15:09:23 CET