> Begin forwarded message:
>
> From: Churamani Paudel <cpaudel1_at_student.gsu.edu>
> Subject: Re: [fluka-discuss]: geoviewer package is missing
> Date: 11 July 2016 at 20:53:38 GMT+2
> To: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
>
> Dear Fluka Expert,
>
> Thank you for your suggestions, after reasonable start, for other problems I will keep consulting!
>
> Churamani
> From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
> Sent: Monday, July 11, 2016 2:47:09 PM
> To: Churamani Paudel
> Subject: Re: [fluka-discuss]: geoviewer package is missing
>
> Hi Churamani,
> There’s nothing better to start other then the lecture and the examples from the Fluka courses:
> https://indico.cern.ch/event/442634/ <https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2findico.cern.ch%2fevent%2f442634%2f&data=01%7c01%7ccpaudel1%40student.gsu.edu%7c4e466b0a18fd4982c86d08d3a9bbc594%7c704d822c358a47849a1649e20b75f941%7c0&sdata=%2bW2aVwQ7sWjdeR81XBCpP8warILYamXhP%2fctPjG1OZM%3d>
> (besides the manual of course)
> V.
>
>> On 11 Jul 2016, at 20:31, Churamani Paudel <cpaudel1_at_student.gsu.edu <mailto:cpaudel1_at_student.gsu.edu>> wrote:
>>
>> Dear Fluka Experts,
>> I somehow managed to install fluka on my linux and Windows via virtual box.,
>> I could not get idea to write input file and run a simple example.
>> may I get some idea?
>> Thanks
>> Ch uramani
>> From: owner-fluka-discuss_at_mi.infn.it <mailto:owner-fluka-discuss_at_mi.infn.it> <owner-fluka-discuss_at_mi.infn.it <mailto:owner-fluka-discuss_at_mi.infn.it>> on behalf of Vittorio Boccone <dr.vittorio.boccone_at_ieee.org <mailto:dr.vittorio.boccone_at_ieee.org>>
>> Sent: Monday, July 11, 2016 4:36:26 AM
>> To: Roman Savinov
>> Cc: fluka-discuss_at_fluka.org <mailto:fluka-discuss_at_fluka.org>
>> Subject: Re: [fluka-discuss]: geoviewer package is missing
>>
>> Hi Roman,
>> when you recompile geoviewer you need to be sure to have also tk, python-tk, python-dev, tk-dev, libx11-dev
>> As from this point you miss the python-dev, but you might miss also some of the others.
>>
>> Alter the building do a make install (don’t forget to install flair beforehands)
>>
>> Best, Vittorio
>>
>>
>>> On 11 Jul 2016, at 08:39, Roman Savinov <rsavinov_at_calpoly.edu <mailto:rsavinov_at_calpoly.edu>> wrote:
>>>
>>> Dear Fluka experts,
>>>
>>> I managed to install Fluka and Flair on 64bit Ubuntu 14.04 LTS. Everything works fine except the geoviewer package is missing:
>>> <pastedImage.png>
>>> I installed it from the deb package and the process showed no issues.
>>> When I tried to install it from the Tar-gzip the following error occurred:
>>>
>>> geometryobject.h:62:20: fatal error: Python.h: No such file or directory
>>> #include <Python.h>
>>> ^
>>> compilation terminated.
>>>
>>> locate Python.h gives the following output:
>>> /usr/include/python2.7_d/Python.h
>>> /usr/include/python3.4m/Python.h
>>>
>>> Then i followed this instructions:
>>> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/6509.html <https://na01.safelinks.protection.outlook.com/?url=http%3a%2f%2fwww.fluka.org%2fweb_archive%2fearchive%2fnew-fluka-discuss%2f6509.html&data=01%7c01%7ccpaudel1%40student.gsu.edu%7c293910fa4752472554de08d3a975e91b%7c704d822c358a47849a1649e20b75f941%7c0&sdata=jatW%2bS6fg1phtH0dXhQaJ4A9N2y9zJptGc0LyASdBb4%3d>
>>>
>>> The only python.h among a long list of other packages were:
>>> ibpython2.7-dbg: /usr/include/python2.7_d/Python.h
>>> libpython2.7-dev: /usr/include/python2.7/Python.h
>>> libpython3.4-dbg: /usr/include/python3.4dm/Python.h
>>> libpython3.4-dev: /usr/include/python3.4m/Python.h
>>> pypy-dev: /usr/lib/pypy/include/Python.h
>>>
>>> so I installed all 5 of them and tried to compile flair-geoviewer again from tar file. This time installation seems to went without any errors. At least "Python.h: No such file or directory" didn't show up again.
>>> However, when I launch flair, it still says that geoviewer package is missing. I attached the geoviewer installation log
>>> What should I do?
>>>
>>> Thank you,
>>>
>>> Roman
>>> <geoviewer_log>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Jul 11 2016 - 22:32:13 CEST