Re: [fluka-discuss]: Built and import an anthropomorphic phantom in Fluka

From: Francesco Di Matteo <francesco.dimatteo2_at_studio.unibo.it>
Date: Sun, 27 Nov 2016 12:41:07 +0000

Gent.mo Dott.Boccone,

non si preoccupi affatto anzi, la ringrazio molto per il materiale inviato.

Un cordiale saluto

Francesco Di Matteo

________________________________
Da: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
Inviato: domenica 27 novembre 2016 10.43.07
A: Francesco Di Matteo
Cc: fluka-discuss_at_fluka.org
Oggetto: Re: [fluka-discuss]: Built and import an anthropomorphic phantom in Fluka

Ciao Francesco,
 scusa se ho scritto "Matteo" nella risposta.
Best,
V.

On 26 Nov 2016, at 18:33, Vittorio Boccone <dr.vittorio.boccone_at_ieee.org<mailto:dr.vittorio.boccone_at_ieee.org>> wrote:

Hi Matteo,
If you are new to Fluka I would suggest you to go thought the course material to get familiar with the lingo and the feature of the code.
About the ICRP, check those two threads:
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/9282.html
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/3364.html

Please read the thread, here you might find also some chunk of code which might expo you on the way:
https://github.com/drbokko/fluka-snippets

Best
Vittorio

On 26 Nov 2016, at 11:55, Francesco Di Matteo <francesco.dimatteo2_at_studio.unibo.it<mailto:francesco.dimatteo2_at_studio.unibo.it>> wrote:

Dear Fluka Experts,
I'm an engineer and in this period I'm working on my thesis with Fluka. In particular, my project is about the validation of a shielding material and then use this material to set up a dosimetric analysis on a human phantom. My problem is just on the construction of the phantom.
The models that I have to use are the adult reference phantoms from the ICRP publication 110.

I chose the male model, that is made of the following files:
- AM.dat
- AM_blood.dat
- AM_media.dat
- AM_organs.dat
- AM_spongiosa.dat

My question is: how can i use all these files to built a full complete phantom ( with all organs..) and import it in Fluka??
I understand that the way is the voxel conversion and i also found on the fluka manual a program but I don't know how to work in the correct way.
Can someone guide me ?

Many thanks for considering my request and for the support.
Best regards
Francesco Di Matteo




__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Nov 27 2016 - 15:12:05 CET

This archive was generated by hypermail 2.3.0 : Sun Nov 27 2016 - 15:12:07 CET