Re: [fluka-discuss]: Simple simulation error *TIMED-OUT*

From: Santana, Mario <msantana_at_SLAC.Stanford.EDU>
Date: Tue, 7 Mar 2017 17:52:09 +0000

Hi Cristian,

I donтАЩt think that it never finishes the first cycle, it rather finishes abruptly as it does not seem to find the cross-section that you request. Did you take a look at the *.out, *.err files?
The reason seems to be the LOW-NEUT card where you are requesting a 72 group structure while FLUKA now has neutron cross-sections in 260 groups. If you comment that card, the simulation is completed correctly.

Mario

On 3/6/17, 2:47 AM, "owner-fluka-discuss_at_mi.infn.it on behalf of Cristian Antochi" <owner-fluka-discuss_at_mi.infn.it on behalf of VasileCristian.Antochi_at_roma1.infn.it> wrote:

    Hello,
    I'm trying to run a simple simulation on FLUPIX with a primary beam of
    neutrons on a box with helium but it looks like it never finishes the
    first cycle. The virtual machine has 2 GB allocated, so it shouldn't be
    a problem.
    I attach the input file (and a txt version of it).
    You have any suggestions?
    
    Thank you,
    Cristian Antochi

                                                       Ў(╣╞зЩй┌Быз▓цьr╕й╢*'~║&╢мЩиеКx%К╦Z╢mж╧   0¤∙nСпшо▀Цщ■Шi■'i╟ Кwш
Received on Tue Mar 07 2017 - 19:47:15 CET

This archive was generated by hypermail 2.3.0 : Tue Mar 07 2017 - 19:47:19 CET