Source.f problem...?

Date: Thu Mar 15 2007 - 11:44:12 CET

  • Next message: Sebastien WURTH: "Re: Source sub routine"

    Dear Fluka author,
             I have to use the beam with different
    kinetic energy in one run, then i used Source.f to
    read the KE from file, but i still want to define
    the proper of the beam as the annular beam as
    defined by below cards. The Beam and Beampos cards

    BEAM -1. 0.0 0.0 157.
          0.0 -1. NEUTRON

    BEAMPOS 125.0 0.0 150.0 0.0
                 0.0 NEGATIVE

       So, i inserted lbeamc = .true. and rflood = 157.0
    rvlmin = 0.0 (cm), which the fluence plotted by
    flukaGUI is not the same as defined by above
    cards. Could you kindly guide me how to define in
    Source.f and the property of the beam is still the
    same as define by above cards.
              Preeksingh Anan....

    This mail sent through MU-Webmail:

  • Next message: Sebastien WURTH: "Re: Source sub routine"

    This archive was generated by hypermail 2.1.6 : Thu Mar 15 2007 - 16:00:09 CET