Hi Vladimir,
OK, even if your are able to visualize the geometry correctly, a
GEOFAR error
usually indicates a problem in the geometry. In your case you have many
volumes and there
can be an accuracy problem in the definition of boundaries between them.
Inspecting the
.err file, you find for instance this message:
Geofar: Particle in region 2 (cell # 0) in position
-1.000000000E-11 2.100900010E+01 6.253070334E-02
is now causing trouble, requesting a step of 4.659204660E+01 cm
to direction 1.000000000E+00 0.000000000E+00 0.000000000E+00,
error count: 0
R2: 2.100900010E+01 R3: 2.100909316E+01 cm
X*U (2D): -1.000000000E-11 X*U (3D): -1.000000000E-11 cm
X*UOLD(2D): 0.000000000E+00 X*UOLD(3D): 0.000000000E+00 cm
Kloop: 4, Irsave: 2, Irsav2: 2, error code: -3
Nfrom: *****
old direction 0.000000000E+00 0.000000000E+00 0.000000000E+00,
lagain, lstnew, lsense, lsnsct F F F F
Particle index 0 total energy 0.000000000E+00 GeV Nsurf 0
We succeeded in saving the particle: current region is n. 4 (cell
# 0)
and see that FLUKA has problems in tracking particles from position XYZ
to direction ABC
by a step of S. The error position is given by the vector operation: XYZ
+ S * ABC.
You can do the following:
1. check the volume corresponding to the error position computed as above;
2. increase as much that you can the precision in the definition of your
geometry,
switching maybe to free format (comma separated WHATs) to have more
than 10 digits precision;
3. reduce a bit WHAT(2) in GEOBEGIN (see manual): this is a parameter
used to define
the boundaries position while tracking and in your case the default
might need to
be readjusted;
4. activate the geometry debugger around the error point ith the GEOEND
card (see manual).
Hope this helps!
Andrea
Il 17/09/2017 10:18, Vladimir Fedorov ha scritto:
> Dear Andrea!
> I do not think that it is mistakes in Fluka geometry. Calculations
> take place without mistakes.
> Mistakes generate Flair+GEOFAR.
> I can show the page of geometry Flair. There everything is correct.
> --
> Best regards
> Vladimir Fedorov
> 17.09.2017, 10:38, "Andrea Fontana" <andrea.fontana_at_pv.infn.it>:
>>
>> Hello Vladimir,
>> I have looked at your files and it seems to me that there are
>> errors in your
>> geometry (I do not have the voxels file and cannot further investigate
>> nor reproduce
>> your error). Please check at the end of the flairbvvDJY001.out file:
>>
>> Abort called from GEOFAR reason TOO MANY ERRORS IN GEOMETRY: STOP Run
>> stopped!
>> STOP TOO MANY ERRORS IN GEOMETRY: STOP
>>
>> Best regards,
>> Andrea
>>
>>
>> Il 16/09/2017 19:57, Vladimir Fedorov ha scritto:
>>
>> --
>> Best regards
>> Vladimir Fedorov
>> Dear Andrea!
>> I cleaned all fields at Flair Plot, setup all auto, and got as a
>> result the same picture without contours and some Flair's files
>> (look
>> at temp.zip).
>> --
>> Best regards
>> Vladimir Fedorov
>> 16.09.2017, 17:25, "Andrea Fontana" <andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>>:
>>
>> Hi Vladimir,
>> I see that you use the geometry Red (front view) at
>> position 21.
>> You can try "Auto" and the geometry should be visible also
>> with the log
>> scale.
>>
>> Andrea
>>
>> Il 16/09/2017 15:47, Федоров Владимир ha scritto:
>>
>> Dear Andrea!
>> Yes, I find Aspect under Title. Thank you.
>> I can show Flair screen (see attachment))
>> 16.09.2017, 16:15, "Andrea Fontana"
>> <andrea.fontana_at_pv.infn.it <mailto:andrea.fontana_at_pv.infn.it>
>> <mailto:andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>>>:
>>
>> Dear Vladimir,
>>
>> 1. Have you tried to set the Geometry Use options
>> (bottom
>> right in the
>> plot panel) to "Auto"
>> or to the name of your project?
>>
>> 2. If you click on "Title" in the plot panel, extra
>> options
>> will be
>> available: here you can
>> force an aspect ratio 1 or select "Auto" to let
>> Flair do
>> it for you.
>>
>> Cheers,
>> Andrea
>>
>> Il 16/09/2017 10:45, Vladimir Fedorov ha scritto:
>>
>> Dear Flair experts!
>> I have two questions of drawing in Flair.
>> 1. Why at setting of the linear scale of sizes
>> I can
>> receive the
>> picture with contours of bodies (pict1.png).
>> But if to
>> establish
>> a log
>> chart, then contours disappear (pict2.png).
>> How to keep
>> a contours?
>> 2. When drawing with identical sizes on axes
>> (square)
>> the picture
>> looks oblate down. How to correct it?
>> I thank for the help.
>> --
>> Best regards
>> Vladimir Fedorov
>> --
>> Best regards
>> V.Fedorov
>>
>> --
>> ========================================================================
>> Dr. Andrea Fontana tel: +39 0382 987991
>> Istituto Nazionale fax: +39 0382 423241
>> di Fisica Nucleare
>> Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>
>> <mailto:andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>>
>> <mailto:andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>
>> <mailto:andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>>>
>> Via Bassi 6 web : www.pv.infn.it/~fontana
>> <http://www.pv.infn.it/%7Efontana>
>> <http://www.pv.infn.it/%7Efontana>
>> <http://www.pv.infn.it/%7Efontana>
>> 27100 PAVIA, Italy
>> ========================================================================
>>
>> --
>> Best regards
>> V.Fedorov
>>
>> --
>> ========================================================================
>> Dr. Andrea Fontana tel: +39 0382 987991
>> Istituto Nazionale fax: +39 0382 423241
>> di Fisica Nucleare
>> Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>
>> <mailto:andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>>
>> Via Bassi 6 web : www.pv.infn.it/~fontana
>> <http://www.pv.infn.it/%7Efontana>
>> <http://www.pv.infn.it/%7Efontana>
>> 27100 PAVIA, Italy
>> ========================================================================
>>
>> --
>> Best regards
>> V.Fedorov
>>
>> --
>> ========================================================================
>> Dr. Andrea Fontana tel: +39 0382 987991
>> Istituto Nazionale fax: +39 0382 423241
>> di Fisica Nucleare
>> Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
>> <mailto:andrea.fontana_at_pv.infn.it>
>> Via Bassi 6 web : www.pv.infn.it/~fontana
>> <http://www.pv.infn.it/%7Efontana>
>> 27100 PAVIA, Italy
>> ========================================================================
>>
> --
> Best regards
> V.Fedorov
--
========================================================================
Dr. Andrea Fontana tel: +39 0382 987991
Istituto Nazionale fax: +39 0382 423241
di Fisica Nucleare
Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
Via Bassi 6 web : www.pv.infn.it/~fontana
27100 PAVIA, Italy
========================================================================
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Sep 17 2017 - 11:51:30 CEST