--- Dávid Horváth Junior Researcher Radiation Protection ELI Beamlines E: david.horvath_at_eli-beams.eu T: +420 266 051 283 M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic ________________________________________ From: Alessandro <alex.calamida2_at_tiscalinet.it> Sent: 21 May 2019 15:48:21 To: Horváth Dávid; fluka-discuss_at_fluka.org Subject: Re: [fluka-discuss]: FLUKA installation problem Dear Horvàth, When I istalled FLUKA in January I had no problem with the compability with Ubuntu. I will also try the fix discussed in the discussion you posted. I have Ubuntu18 and not 16. Should not this cause a problem? I cannot find the .bashrc file, is it a FLUKA file or a system one? Best regards, Alessandro Calamida. Il 21/05/2019 14:53, Horváth Dávid ha scritto: > Dear Alessandro, > > the best option is to edit your .bashrc file, and add the 'export FLUFOR=gfortran' just after the line for FLUPRO. Then log out from Linux and log back in, to finalize the change. > > But there is a different error as well. It seems you are using a Ubuntu, which uses uses "dash" instead of "bash" when the "sh" shell is used by a script. Unfortunately they are not fully compatible. > > You can resolve the issue as shown here: > http://www.fluka.org/web_archive/earchive/new-fluka-discuss/13244.html > > The difference in the minor version number of gfortran (8.2 vs 8.3) shouldn't cause any problem. > > Kind regards, > Dávid Horváth > > Junior Researcher > Radiation Protection > ELI Beamlines > > E: david.horvath_at_eli-beams.eu > T: +420 266 051 283 > M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic > > > ________________________________________ > From: Alessandro <alex.calamida2_at_tiscalinet.it> > Sent: 21 May 2019 14:36:21 > To: Horváth Dávid; fluka-discuss_at_fluka.org > Subject: Re: [fluka-discuss]: FLUKA installation problem > > Dear Horvath, > > I have used the comand 'export FLUFOR=gfortran'. It seems that this is > the errors but I do not understand why this happens. This is the full > script: > > FLUPRO=/home/alessandro/Desktop/FLUKA_2 flutil/lfluka -o flukahp -m fluka > $FLUPRO = /home/alessandro/Desktop/FLUKA_2 > now linking > /home/alessandro/Desktop/FLUKA_2 > g77 > ar x /home/alessandro/Desktop/FLUKA_2/libflukahp.a fluka.o > rm: cannot remove 'flukahp.map': No such file or directory > g77 -m32 -mcpu=pentiumpro -O3 -g -fexpensive-optimizations > -funroll-loops -fstrength-reduce -Wall -fno-automatic -fno-silent > -ffortran-bounds-check -I/home/alessandro/Desktop/FLUKA_2/flukapro -v -o > flukahp -Xlinker -Map -Xlinker flukahp.map fluka.o > -L/home/alessandro/Desktop/FLUKA_2 -lflukahp > flutil/lfluka: 157: flutil/lfluka: g77: not found > cd flutil; FLUPRO=/home/alessandro/Desktop/FLUKA_2 make all; cd .. > make[1]: Entering directory '/home/alessandro/Desktop/FLUKA_2/flutil' > /home/alessandro/Desktop/FLUKA_2/flutil/fff -N actdline.f > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpadd.f > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpc.f > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpfor.f > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found > /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129: > /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found > gfortran -o actdline actdline.o > gfortran: error: actdline.o: No such file or directory > make[1]: *** [makefile:61: actdline] Error 1 > make[1]: Leaving directory '/home/alessandro/Desktop/FLUKA_2/flutil' > > I have gfotran 8.2 and I have dowloaded the version for linux at 64 bit > for gfotran8. Could the use of gfortran8 be the cause of the problems? > Have I to use a comand after FLUFOR to choose the right version of gfortran? > > Best regards, Alessandro Calamida. > > Il 21/05/2019 13:59, Horváth Dávid ha scritto: >> Dear Alessandro, >> >> without the full error message is hard to tell, but it seems, that the FLUFOR variable is not set correctly. Use the 'export FLUFOR=gfortran' command to set if for gfortran. >> Before running 'make', run 'make clean' to remove any remaining files from the failed compilation. >> >> Dávid Horváth >> >> Junior Researcher >> Radiation Protection >> ELI Beamlines >> >> E: david.horvath_at_eli-beams.eu >> T: +420 266 051 283 >> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic >> >> >> ________________________________________ >> From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Alessandro <alex.calamida2_at_tiscalinet.it> >> Sent: 21 May 2019 13:04:22 >> To: fluka-discuss_at_fluka.org >> Subject: [fluka-discuss]: FLUKA installation problem >> >> Dear FLUKA experts, >> >> I am trying to install the new version of FLUKA. I need the linux >> version at 64 bit for gfortran8. I follow all the passage but then I >> have this error: 'gfortran: error: actdline.o: No such file or >> directory'. I read that is needed gfortran8.3 but I tried to update my >> gfortran8.2 but the system told me that it is already the newest version. >> >> How can I solve this problem? There are other comands to use? >> >> This is already the fourt time that I install FLUKA but it is the first >> one that I encounter this kind of error. >> >> Best regards, Alessandro Calamida. >> >> __________________________________________________________________________ >> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info >> >> >> --- >> Questa email è stata esaminata alla ricerca di virus da AVG. >> http://www.avg.com >> __________________________________________________________________________ You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_infoReceived on Tue May 21 2019 - 17:08:38 CEST
This archive was generated by hypermail 2.3.0 : Tue May 21 2019 - 17:08:40 CEST