Dear Horvàth,
When I istalled FLUKA in January I had no problem with the compability
with Ubuntu. I will also try the fix discussed in the discussion you
posted. I have Ubuntu18 and not 16. Should not this cause a problem?
I cannot find the .bashrc file, is it a FLUKA file or a system one?
Best regards, Alessandro Calamida.
Il 21/05/2019 14:53, Horváth Dávid ha scritto:
> Dear Alessandro,
>
> the best option is to edit your .bashrc file, and add the 'export FLUFOR=gfortran' just after the line for FLUPRO. Then log out from Linux and log back in, to finalize the change.
>
> But there is a different error as well. It seems you are using a Ubuntu, which uses uses "dash" instead of "bash" when the "sh" shell is used by a script. Unfortunately they are not fully compatible.
>
> You can resolve the issue as shown here:
> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/13244.html
>
> The difference in the minor version number of gfortran (8.2 vs 8.3) shouldn't cause any problem.
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: Alessandro <alex.calamida2_at_tiscalinet.it>
> Sent: 21 May 2019 14:36:21
> To: Horváth Dávid; fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: FLUKA installation problem
>
> Dear Horvath,
>
> I have used the comand 'export FLUFOR=gfortran'. It seems that this is
> the errors but I do not understand why this happens. This is the full
> script:
>
> FLUPRO=/home/alessandro/Desktop/FLUKA_2 flutil/lfluka -o flukahp -m fluka
> $FLUPRO = /home/alessandro/Desktop/FLUKA_2
> now linking
> /home/alessandro/Desktop/FLUKA_2
> g77
> ar x /home/alessandro/Desktop/FLUKA_2/libflukahp.a fluka.o
> rm: cannot remove 'flukahp.map': No such file or directory
> g77 -m32 -mcpu=pentiumpro -O3 -g -fexpensive-optimizations
> -funroll-loops -fstrength-reduce -Wall -fno-automatic -fno-silent
> -ffortran-bounds-check -I/home/alessandro/Desktop/FLUKA_2/flukapro -v -o
> flukahp -Xlinker -Map -Xlinker flukahp.map fluka.o
> -L/home/alessandro/Desktop/FLUKA_2 -lflukahp
> flutil/lfluka: 157: flutil/lfluka: g77: not found
> cd flutil; FLUPRO=/home/alessandro/Desktop/FLUKA_2 make all; cd ..
> make[1]: Entering directory '/home/alessandro/Desktop/FLUKA_2/flutil'
> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N actdline.f
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpadd.f
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpc.f
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpfor.f
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
> gfortran -o actdline actdline.o
> gfortran: error: actdline.o: No such file or directory
> make[1]: *** [makefile:61: actdline] Error 1
> make[1]: Leaving directory '/home/alessandro/Desktop/FLUKA_2/flutil'
>
> I have gfotran 8.2 and I have dowloaded the version for linux at 64 bit
> for gfotran8. Could the use of gfortran8 be the cause of the problems?
> Have I to use a comand after FLUFOR to choose the right version of gfortran?
>
> Best regards, Alessandro Calamida.
>
> Il 21/05/2019 13:59, Horváth Dávid ha scritto:
>> Dear Alessandro,
>>
>> without the full error message is hard to tell, but it seems, that the FLUFOR variable is not set correctly. Use the 'export FLUFOR=gfortran' command to set if for gfortran.
>> Before running 'make', run 'make clean' to remove any remaining files from the failed compilation.
>>
>> Dávid Horváth
>>
>> Junior Researcher
>> Radiation Protection
>> ELI Beamlines
>>
>> E: david.horvath_at_eli-beams.eu
>> T: +420 266 051 283
>> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>>
>>
>> ________________________________________
>> From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Alessandro <alex.calamida2_at_tiscalinet.it>
>> Sent: 21 May 2019 13:04:22
>> To: fluka-discuss_at_fluka.org
>> Subject: [fluka-discuss]: FLUKA installation problem
>>
>> Dear FLUKA experts,
>>
>> I am trying to install the new version of FLUKA. I need the linux
>> version at 64 bit for gfortran8. I follow all the passage but then I
>> have this error: 'gfortran: error: actdline.o: No such file or
>> directory'. I read that is needed gfortran8.3 but I tried to update my
>> gfortran8.2 but the system told me that it is already the newest version.
>>
>> How can I solve this problem? There are other comands to use?
>>
>> This is already the fourt time that I install FLUKA but it is the first
>> one that I encounter this kind of error.
>>
>> Best regards, Alessandro Calamida.
>>
>> __________________________________________________________________________
>> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
>>
>>
>> ---
>> Questa email è stata esaminata alla ricerca di virus da AVG.
>> http://www.avg.com
>>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Tue May 21 2019 - 17:08:38 CEST