Dear Alessandro,
to see the hidden files using the file browser, press Ctrl+H
in the terminal you can list all files with 'ls -al'
you need to add the following lines at the bottom:
export FLUPRO=/home/alessandro/Desktop/FLUKA_2
export FLUFOR=gfortran
Kind regadrs,
Dávid Horváth
Junior Researcher
Radiation Protection
ELI Beamlines
E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
________________________________________
From: Alessandro <alex.calamida2_at_tiscalinet.it>
Sent: 21 May 2019 16:11:22
To: Horváth Dávid; fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: FLUKA installation problem
Dear Horvàth,
I really do not know how to find the .bashrc file. I am not a usual
ubuntu user. So, where can I find it and what I have to change?
The last time FLUKA compiles succesfully. It was the old version of it.
Maybe the error happened but FLUKA compile itself anymay. With flair on
a server, the compilation gave me an error but it work perfectly.
Best regards, Alessandro Calamida.
Il 21/05/2019 16:02, Horváth Dávid ha scritto:
> Dear Alessandro,
>
> It is strange to me, that you didn't encounter this problem on a different Ubuntu machine. Probably the error was there, but FLUKA compiled successfully.
>
> It doesn't matter if you are using Ubuntu 18.xx, the solution still applies.
>
> The .bashrc is a hidden file in you home directory. The commands contained in it are run automatically when you log in or open a new terminal window.
>
> Kind regards,
> David
>
> ---
>
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: Alessandro <alex.calamida2_at_tiscalinet.it>
> Sent: 21 May 2019 15:48:21
> To: Horváth Dávid; fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: FLUKA installation problem
>
> Dear Horvàth,
>
> When I istalled FLUKA in January I had no problem with the compability
> with Ubuntu. I will also try the fix discussed in the discussion you
> posted. I have Ubuntu18 and not 16. Should not this cause a problem?
>
> I cannot find the .bashrc file, is it a FLUKA file or a system one?
>
> Best regards, Alessandro Calamida.
>
> Il 21/05/2019 14:53, Horváth Dávid ha scritto:
>> Dear Alessandro,
>>
>> the best option is to edit your .bashrc file, and add the 'export FLUFOR=gfortran' just after the line for FLUPRO. Then log out from Linux and log back in, to finalize the change.
>>
>> But there is a different error as well. It seems you are using a Ubuntu, which uses uses "dash" instead of "bash" when the "sh" shell is used by a script. Unfortunately they are not fully compatible.
>>
>> You can resolve the issue as shown here:
>> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/13244.html
>>
>> The difference in the minor version number of gfortran (8.2 vs 8.3) shouldn't cause any problem.
>>
>> Kind regards,
>> Dávid Horváth
>>
>> Junior Researcher
>> Radiation Protection
>> ELI Beamlines
>>
>> E: david.horvath_at_eli-beams.eu
>> T: +420 266 051 283
>> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>>
>>
>> ________________________________________
>> From: Alessandro <alex.calamida2_at_tiscalinet.it>
>> Sent: 21 May 2019 14:36:21
>> To: Horváth Dávid; fluka-discuss_at_fluka.org
>> Subject: Re: [fluka-discuss]: FLUKA installation problem
>>
>> Dear Horvath,
>>
>> I have used the comand 'export FLUFOR=gfortran'. It seems that this is
>> the errors but I do not understand why this happens. This is the full
>> script:
>>
>> FLUPRO=/home/alessandro/Desktop/FLUKA_2 flutil/lfluka -o flukahp -m fluka
>> $FLUPRO = /home/alessandro/Desktop/FLUKA_2
>> now linking
>> /home/alessandro/Desktop/FLUKA_2
>> g77
>> ar x /home/alessandro/Desktop/FLUKA_2/libflukahp.a fluka.o
>> rm: cannot remove 'flukahp.map': No such file or directory
>> g77 -m32 -mcpu=pentiumpro -O3 -g -fexpensive-optimizations
>> -funroll-loops -fstrength-reduce -Wall -fno-automatic -fno-silent
>> -ffortran-bounds-check -I/home/alessandro/Desktop/FLUKA_2/flukapro -v -o
>> flukahp -Xlinker -Map -Xlinker flukahp.map fluka.o
>> -L/home/alessandro/Desktop/FLUKA_2 -lflukahp
>> flutil/lfluka: 157: flutil/lfluka: g77: not found
>> cd flutil; FLUPRO=/home/alessandro/Desktop/FLUKA_2 make all; cd ..
>> make[1]: Entering directory '/home/alessandro/Desktop/FLUKA_2/flutil'
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N actdline.f
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpadd.f
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpc.f
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff -N hpfor.f
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 119:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: [[: not found
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: 129:
>> /home/alessandro/Desktop/FLUKA_2/flutil/fff: g77: not found
>> gfortran -o actdline actdline.o
>> gfortran: error: actdline.o: No such file or directory
>> make[1]: *** [makefile:61: actdline] Error 1
>> make[1]: Leaving directory '/home/alessandro/Desktop/FLUKA_2/flutil'
>>
>> I have gfotran 8.2 and I have dowloaded the version for linux at 64 bit
>> for gfotran8. Could the use of gfortran8 be the cause of the problems?
>> Have I to use a comand after FLUFOR to choose the right version of gfortran?
>>
>> Best regards, Alessandro Calamida.
>>
>> Il 21/05/2019 13:59, Horváth Dávid ha scritto:
>>> Dear Alessandro,
>>>
>>> without the full error message is hard to tell, but it seems, that the FLUFOR variable is not set correctly. Use the 'export FLUFOR=gfortran' command to set if for gfortran.
>>> Before running 'make', run 'make clean' to remove any remaining files from the failed compilation.
>>>
>>> Dávid Horváth
>>>
>>> Junior Researcher
>>> Radiation Protection
>>> ELI Beamlines
>>>
>>> E: david.horvath_at_eli-beams.eu
>>> T: +420 266 051 283
>>> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>>>
>>>
>>> ________________________________________
>>> From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Alessandro <alex.calamida2_at_tiscalinet.it>
>>> Sent: 21 May 2019 13:04:22
>>> To: fluka-discuss_at_fluka.org
>>> Subject: [fluka-discuss]: FLUKA installation problem
>>>
>>> Dear FLUKA experts,
>>>
>>> I am trying to install the new version of FLUKA. I need the linux
>>> version at 64 bit for gfortran8. I follow all the passage but then I
>>> have this error: 'gfortran: error: actdline.o: No such file or
>>> directory'. I read that is needed gfortran8.3 but I tried to update my
>>> gfortran8.2 but the system told me that it is already the newest version.
>>>
>>> How can I solve this problem? There are other comands to use?
>>>
>>> This is already the fourt time that I install FLUKA but it is the first
>>> one that I encounter this kind of error.
>>>
>>> Best regards, Alessandro Calamida.
>>>
>>> __________________________________________________________________________
>>> You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
>>>
>>>
>>> ---
>>> Questa email è stata esaminata alla ricerca di virus da AVG.
>>> http://www.avg.com
>>>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Tue May 21 2019 - 17:19:10 CEST