Pls I kept on getting lines instead of spectrum. What might be the problem?
On Thu, Sep 12, 2019, 12:49 AM Celestine Onjewu Oche <
oche.pg821497_at_st.futminna.edu.ng> wrote:
> Thanks for your response and for the link. I used the input file and
> defined the detector (attached) and tried to score the neutron fluence.
> The result from the manual shows Attachment 1. While from my plot, I got
> attachment 2. Where may the problem lie? Is it with my detectors or the
> plotting set up. Thanks and regards
>
> On Wed, Sep 11, 2019, 9:36 PM Celestine Onjewu Oche <
> oche.pg821497_at_st.futminna.edu.ng> wrote:
>
>> Thanks stefan.
>>
>> On Wed, Sep 11, 2019, 9:20 PM Stefan Roesler <Stefan.Roesler_at_cern.ch>
>> wrote:
>>
>>> Hello
>>>
>>>
>>>
>>> This is one of the exercises of the FLUKA Beginner Course. You can find
>>> the solution on the web, for example
>>>
>>>
>>>
>>>
>>> https://indico.cern.ch/event/694979/contributions/2927101/attachments/1657764/2654526/ex_Geo1_final.inp
>>>
>>>
>>>
>>> Cheers
>>>
>>> Stefan
>>>
>>>
>>>
>>> *From:* owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> *On
>>> Behalf Of *Celestine Onjewu Oche
>>> *Sent:* 10 September 2019 17:48
>>> *To:* Fluka Discuss <fluka-discuss_at_fluka.org>
>>> *Subject:* [fluka-discuss]: Three layer structure
>>>
>>>
>>>
>>> Hello Professionals,
>>>
>>> I want to define this geometry as seen in the problem (attached
>>> picture). They used RCC as the whole shape and air outside. For the three
>>> layers, which are water, aluminum and lead, I am bugged by the definition
>>> used to create these regions (geometry and region declaration). Pls I need
>>> help with the definition and I have attached the .inp file for reference,
>>> corrections and possible suggestions. Thanks
>>>
>>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Sep 13 2019 - 01:32:16 CEST