Re: A logic code error (possibly?)

From: Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch>
Date: Thu, 1 Jul 2010 14:47:56 +0200

Hi Joseph,

The WHAT(5)=2 is on GEOBEGIN card not on GEOEND.

I've made a geometry debugging test on the region
X[-10:10]x101 Y:[0:0]x1 Z:[550:590]x101
and with WHAT(5)=3 and I get the following errors
   **** Lookdb: Geometry error found ****
   **** The point: 2.87128713 0. 561.089109 ****
   **** is contained in more than 1 region ****
   **** (regions: 47 HoleD2a 49 Wedge ) ****

while setting to WHAT(5)=2 I get no error in that region

Regards
Vasilis

On 06/30/10 05:24, Joseph Comfort wrote:
> Dear Vasilis,
>
> The situation is a bit worse than what I reported earlier. I have run a
> few million events through the geometry. They get most of the way, but
> do get get past the 'wedge' region. It does not matter if
> geoend.what(5)=2 or the default 3. The code, of course, is uncorrected,
> but the work-around does not work. I do not see any error messages.
>
> I do get events if I leave out the 'D2' magnet region. They look
> sensible for that condition, but are not as reliable. I'll have to wait
> for the respin, I guess.
>
> Regards,
> Joe
>
>

-- 
-------------------------------------------------------
Vasilis Vlachoudis
Dep. EN-STI-EET
Web: home.cern.ch/bnv
Tel: +41-22-7679851
Fax: +41-22-7669644
-------------------------------------------------------
Received on Thu Jul 01 2010 - 17:01:07 CEST

This archive was generated by hypermail 2.2.0 : Thu Jul 01 2010 - 17:01:38 CEST