-- Dr. Vittorio Boccone - University of Geneva o Address: UniGe: Département de physique nucléaire et corpusculaire 24 Quai Ernest-Ansermet, CH-1211 Geneve 4, Switzerland CERN: CERN, CH-1211 Geneve 23, Switzerland o E-mail: vittorio.boccone_at_unige.ch<mailto:vittorio.boccone_at_unige.ch> vittorio.boccone_at_cern.ch<mailto:vittorio.boccone_at_cern.ch> o Phone: Mobile: +41 76 487 5737 UniGe: +41 22 379 6357/6353 CERN: +41 22 767 5821 On 2 Aug 2013, at 15:00, Manuel Rodríguez Pascual <manuel.rodriguez.pascual_at_gmail.com<mailto:manuel.rodriguez.pascual_at_gmail.com>> wrote: I'm sorry to re-post this, but maybe being summer it went unnoticed... Has anybody experienced similar execution/compilation problems when running fluka examples? Thanks for your help, Manuel 2013/8/1 Manuel Rodríguez Pascual <manuel.rodriguez.pascual_at_gmail.com<mailto:manuel.rodriguez.pascual_at_gmail.com>> Hello everyone, I am experiencing some problems when executing Fluka that I have been unable to locate. I intend to run Fluka on different machines, but it sometimes fails and sometimes not. I have performed this experiments on two ways: the first way is copying to every machine the application already compiled with no library dependences, and the second one is by copying the source code and compiling it on every machine. Input file is always the same one, has been obtained from fluka's web and executed with no modifications. Fluka starts correctly, displaying something like (simplified for readability) ./flutil/rfluka -N0 -M5 input_file.inp $TARGET_MACHINE = Linux $FLUPRO = (...) fluka_compiled $PEMF = (...) /fluka_compiled/libec_thihecufealw_10t.pemf Initial seed copied from (...) fluka_compiled Running fluka in / (...) /fluka_compiled/fluka_10448 File (...) /fluka_compiled/sigmapi.bin exists and it is not a link! File (...) fluka_compiled/elasct.bin exists and it is not a link! File (...) /fluka_compiled/nuclear.bin exists and it is not a link! File (...) /fluka_compiled/fluodt.dat exists and it is not a link! File (...) /fluka_compiled/neuxsc-ind_260.bin exists and it is not a link! File (...) /fluka_compiled/xnloan.dat exists and it is not a link! ======================= Running FLUKA for cycle # 1 ======================= And now the problem arises: -In some cases, the application will continue its execution for the desired five cycles, creating the input_file* error, out, log and fort files. -But in other cases, the application immediately stops. No input_file* is generated and no error message is produced (at least in stdout, stderr, .log, .out or .err files). The problem happens in the two aforementioned ways of executing Fluka on different resources: copying the executable and copying the source and compiling it on each resource. This makes me think that the problem is not a compilation issue (although I'm not completely sure about this). The input file is the same in all cases, making me think that it isn't either the problem. So basically I have no clue of what's going on... What am I exactly doing wrong? Is there any way of locating the problem, debugging or something like that? is there any log where I can search for information? Thanks very much for your help. Best regards, Manuel -- Dr. Manuel Rodríguez-Pascual skype: manuel.rodriguez.pascual phone: (+34) 913466173 // (+34) 679925108 CIEMAT-Moncloa Edificio 22, desp. 1.25 Avenida Complutense, 40 28040- MADRID SPAIN -- Dr. Manuel Rodríguez-Pascual skype: manuel.rodriguez.pascual phone: (+34) 913466173 // (+34) 679925108 CIEMAT-Moncloa Edificio 22, desp. 1.25 Avenida Complutense, 40 28040- MADRID SPAIN -- Dr. Manuel Rodríguez-Pascual skype: manuel.rodriguez.pascual phone: (+34) 913466173 // (+34) 679925108 CIEMAT-Moncloa Edificio 22, desp. 1.25 Avenida Complutense, 40 28040- MADRID SPAINReceived on Sat Aug 03 2013 - 00:09:45 CEST
This archive was generated by hypermail 2.3.0 : Sat Aug 03 2013 - 00:09:46 CEST