-- Dr. Vittorio Boccone - University of Geneva o Address: UniGe: Département de physique nucléaire et corpusculaire 24 Quai Ernest-Ansermet, CH-1211 Geneve 4, Switzerland CERN: CERN, CH-1211 Geneve 23, Switzerland o E-mail: vittorio.boccone_at_unige.ch vittorio.boccone_at_cern.ch o Phone: Mobile: +41 76 487 5737 UniGe: +41 22 379 6357/6353 CERN: +41 22 767 5821 On 29 Jul 2013, at 23:27, Mina Nozar <nozarm_at_triumf.ca> wrote: > Dear Paola, > > Thank you for your response. We have no control of building 32 bit > libraries on the 64 bit machines. These machines are part of Compute > Canada farms and are running either Red Hat or SL as the Linux flavour > of choice. The sys. adm. response to my question, i.e. whether they > could install the 32 bit versions of the libgc-dev libraries, was that > they don't support the 32 bit libraries on the 64 bit systems. This > restricts us to the use of one system which does have has 32 bit > libraries installed and another with gfortran 4.6. > > Best wishes, > Mina > > On 13-07-22 11:55 PM, Paola Sala wrote: >> Dear Mina >> >> The g77 version runs only on 32 bit libraries, it is not possible to >> compile it on 64 bit, also because of compatibility issues on binery >> files. The 32 bits libraries can be installed on 64 bits machines. >> Instructions for the Ubuntu distribution can be found in the answers to >> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/3740.html >> >> >> For gfortran, gfortran >= 4.6 is needed. Earlier versions miscompile the >> code. We are sorry for the inconsistency on the fluka web site. Thank you >> for spotting this, now should be corrected. >> Ciao >> Paola >>> Hello everyone, >>> >>> >>> Is it ok/possible to build fluka with the 64 bit libraries on x86_64 >>> systems, using g77? I am running into the problem of building flukahp >>> on an x86_64 which doesn't have the 32 bit libraries installed. For >>> instance, there is /usr/lib64/crtn.o but no /usr/lib/crtn.o. >>> >>> >>> Also, 'https://www.fluka.org/fluka.php?id=secured_intro' says gfortran >>> version >=4.5 is required but when I tried building in a system with gcc >>> version 4.4.7 >>> I got messages, saying: >>> gfortran >= 4.6 is required for running FLUKA!! >>> >>> So my question is will gcc/gfortran 4.5 work or is 4.6 or higher required? >>> >>> This version of the code should be run on the platforms for which it has >>> been released, which are: >>> >>> *GNU/Linux (i686 and x86_64)* requires gcc/g77 (version >= 3.4) >>> *GNU/Linux (x86_64)* beta version, requires gcc/gfortran (version >= 4.5) >>> >>> >>> >>> Many thanks in advance, >>> Mina >>> >> >> Paola Sala >> INFN Milano >> tel. Milano +39-0250317374 >> tel. CERN +41-227679148 >> > >Received on Tue Aug 06 2013 - 13:02:58 CEST
This archive was generated by hypermail 2.3.0 : Tue Aug 06 2013 - 13:03:03 CEST