Re: [fluka-discuss]: Fluka installation on CentOS

From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
Date: Mon, 7 Dec 2015 22:18:29 +0100

Dear Marcelo,
geoviewer is the visual-geometry editor and viewer plugin for flair.

Installation instruction are: http://www.fluka.org/flair/download.html
although I personally prefer to use the *yum* package manage instead of the
*rpm* command for most of the cases as it satisfy all the required
dependencies.

Use http://www.fluka.org/flair/flair-2.1-8.noarch.rpm and
http://www.fluka.org/flair/flair-geoviewer-2.1-8.x86_64.rpm for a 64 bit
system:
*> yum install http://www.fluka.org/flair/flair-2.1-8.noarch.rpm
<http://www.fluka.org/flair/flair-2.1-8.noarch.rpm>
http://www.fluka.org/flair/flair-geoviewer-2.1-8.x86_64.rpm
<http://www.fluka.org/flair/flair-geoviewer-2.1-8.x86_64.rpm>*

flair-2.1-8.src.rpm is a soruce package in case you need to recompile the
package for a different architecture (for example a arm-based raspberry pi
with a pidora distribution).

Best,
Vittorio


On Mon, Dec 7, 2015 at 5:47 AM, <cassese_at_stud.uni-heidelberg.de> wrote:

> Dear Vittorio,
>
> Thank you for sharing that information. Will Flair/Flair Geoviewer
> installation for 64bits machines also work the same way? There are two
> versions of Flair and I don't know which one works with CentoS 7 (noarch or
> src). Flair Geoviewer has one 64 bit rpm option so it's an obvious choice.
>
> flair-2.1-8.noarch.rpm
> flair-2.1-8.src.rpm
>
> flair-geoviewer-2.1-8.x86_64.rpm
>
> Regards,
>
> Marcelo
>


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Dec 07 2015 - 23:38:20 CET