RE: [fluka-discuss]: Beam card: momentum spread of heavy ions per atomic mass unit?

From: Stefan Roesler <Stefan.Roesler_at_cern.ch>
Date: Tue, 20 Jun 2017 14:00:22 +0000

Dear Tim

It follows the definition of beam energy/momentum, i.e. is per nuclear mass unit for HEAVYION

Cheers
Stefan

-----Original Message-----
From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Tim Gehrke
Sent: 20 June 2017 12:13
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: Beam card: momentum spread of heavy ions per atomic mass unit?

Dear Fluka users,

I have one quick question related to the beam card. I would like to specify a momentum spread of heavy ions and I am not sure about the unit.

Should I specify it per atomic mass unit, as it is done for the energy/momentum of heavy ions in the beam card (see manual: "In this case WHAT(1) will mean the energy (or momentum) PER UNIT ATOMIC MASS, and not the total energy or momentum.") ?

Or should I give WHAT(2) as total momentum spread, not dividing by the atomic mass unit?


Thanks for your help and best regards,

Tim Gehrke


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

                                                       Ў(╣╞зЩй┌Быз▓цьr╕й╢*'~║&╢мЩиеКx%К╦Z╢mж╧   0¤∙nСпшо▀Цщ■Шi■'i╟ Кwш
Received on Tue Jun 20 2017 - 17:05:23 CEST

This archive was generated by hypermail 2.3.0 : Tue Jun 20 2017 - 17:05:25 CEST