[fluka-discuss]: Dose-Eq

From: kabytayeva <kabytayeva_at_jinr.ru>
Date: Mon, 14 Aug 2017 11:45:26 +0300

Hello everybody!

There is a piece of copper in the middle of the hall and I need to
calculate the equivalent dose from all particles after interaction
copper with lithium ions with an energy of 18 MeV / nucleon and helium
with an energy of 27 MeV / nucleon. In this regard, I had a few

1) After reading the correspondence between Alberto Fasso and Joel
DeWitt (June 24, 2009), I realized that conversion coefficients are not
available for ions and do I correctly assume from this that for my case
I can get differences with the experimental values?Is it right that if I
use an equivalent dose only for neutrons and for photons I still get the
wrong values ​​of the equivalent dose? So everything depends from
primary particle, is it right?

2) The results from URSBIN DOSE-Eq is pSv per primary, that is, to get
the value pSv / s, I need to multiply by 10^12 ions per second and
multiply by the operating time of the accelerator 1800s, is it right?Is
it possible to do this by using USERWEIG?

Many thanks!

You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Aug 14 2017 - 11:57:52 CEST

This archive was generated by hypermail 2.3.0 : Mon Aug 14 2017 - 11:57:56 CEST