Re: FW: [fluka-discuss]: Problem during RUN on new version of FLUKA/Flair

From: Aman Sharma <amanpup_at_gmail.com>
Date: Mon, 18 Jun 2018 10:41:46 +0530

Dear Dr. Anton Lechner,

Thanks for your valuable reply. I got the point of technicality and tried
to resolve the stated problem. But the problem persists. Please correct my
input file, for some typical values, so that I may RUN it successfully.

Regards,
A. Sharma

On Mon, Jun 4, 2018 at 12:49 AM, Anton Lechner <Anton.Lechner_at_cern.ch>
wrote:

> Dear Aman,
>
> Please keep the Emails on the list such that other users can also profit
> from the answers.
>
> Your run fails because of missing entries on the EMF-CUT card (note that
> some checks have been added in the more recent FLUKA version):
> 1) you have to explicitly specify also a cut for electrons/positrons (on
> WHAT(1)), not only for photons.
> 2) you have to explicitly specify a value on WHAT(3) for the first EMF-CUT
> card with SDUM=PROD-CUT. See following recent thread for more details:
> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/11755.html
>
> Cheers, Anton
>
>
>
> ------------------------------
> *From:* Aman Sharma [amanpup_at_gmail.com]
> *Sent:* 02 June 2018 05:50
> *To:* Anton Lechner
> *Subject:* Re: [fluka-discuss]: Problem during RUN on new version of
> FLUKA/Flair
>
> Dear Dr. A Lechner,
>
> Thanks for supporting the beginners of FLUKA.
>
> With reference to your kind reply, I am sending herewith my input files.
> As already stated, I have installed fluka2011.2x-linux-gfor64bitAA.tar.gz
> <https://www.fluka.org/packages/fluka2011.2x-linux-gfor64bitAA.tar.gz>on
> Ubuntu 18.04 successfully. The input files that were well working in old
> version of FLUKA & ubuntu are now NOT running successfully. Input files get
> loaded successfully through Flair. But during RUN process, Initially Status
> remains "Waiting to attach" and within few seconds status changes to
> "Finished OK" without completing any Cycle/Primaries.
>
> Moreover, the file example.inp (made available by FLUKA) run/processed
> well for all the cycles.
>
> Kindly correct me, where I am making a silly mistake.
>
> Thanks & Regards,
> A. Sharma
> India
>
>
>
> On Wed, May 30, 2018 at 1:27 PM, Anton Lechner <Anton.Lechner_at_cern.ch>
> wrote:
>
>> Dear Aman,
>>
>> Please send the input file.
>>
>> Anton
>>
>>
>> ------------------------------
>> *From:* owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it]
>> on behalf of Aman Sharma [amanpup_at_gmail.com]
>> *Sent:* 30 May 2018 09:14
>> *To:* fluka-discuss
>> *Subject:* [fluka-discuss]: Problem during RUN on new version of
>> FLUKA/Flair
>>
>> Dear FLUKA Experts,
>>
>> With your kind support I have installed fluka2011.2x-linux-gfor64bitAA.tar.gz
>> <https://www.fluka.org/packages/fluka2011.2x-linux-gfor64bitAA.tar.gz>
>> on Ubuntu 18.04 successfully. The input files that were well working in
>> old version of FLUKA are now NOT running successfully. Input files get
>> loaded successfully through Flair. But during RUN process, Initially Status
>> remains "Waiting to attach" and within few seconds status changes to
>> "Finished OK" without completing any Cycle/Primaries.
>>
>> Being a beginner in FLUKA, I might be making some mistake, kindly assist
>> me for a successful RUN.
>>
>> Thanks & Regards,
>> A. Sharma
>>
>>
>


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Jun 18 2018 - 08:36:28 CEST

This archive was generated by hypermail 2.3.0 : Mon Jun 18 2018 - 08:36:30 CEST