Re: [fluka-discuss]: source.f with RESNUCLEI_IRREPROFIL cards

From: Julien Bonvalet <julien.bonvalet_at_u-bordeaux.fr>
Date: Fri, 7 Dec 2018 08:10:53 +0100 (CET)

Thank you very much. It works!!!
Actually, it was the coalescence card that disturbed...

But I can't understand the problem with PHYSICS card "EVAPORATION". There is a bug with FLAIR on WHAT(1).

Best regards

Julien

----- Mail original -----
De: "George Kharashvili" <georgek_at_jlab.org>
À: "Julien Bonvalet" <julien.bonvalet_at_u-bordeaux.fr>
Cc: "fluka-discuss" <fluka-discuss_at_fluka.org>
Envoyé: Mercredi 5 Décembre 2018 13:11:58
Objet: Re: [fluka-discuss]: source.f with RESNUCLEI_IRREPROFIL cards

Hello Julien,

I did not see any timeout errors when running your input, but it fails some checks. The input echo in your .out file may state:
 *** Meaningless PHYSICS/EVAPORAT card, are you sure?? ***
 *** What(1) must be 2, 3 or 4, look at the manual ***
 *** and/or at the release notes ***
 *** Execution terminated ***

For some reason I failed to change What(1) of this PHYSICS card using the flair drop-down selection, but manually editing the card to set What(1)=3.0 fixed the problem.

Another possible check that may have stopped your run is "Coalescence activated and beam above BME limit with no rQMD and no or incompatible IONSPLIT option!" So make sure you link with rQMD when compiling your executable.

You should probably also add IONTRANS card and enable the IRRPROFI card.

Best regards,
George


----- Original Message -----
From: "Julien Bonvalet" <julien.bonvalet_at_u-bordeaux.fr>
To: "FLUKA Discussion List" <fluka-discuss_at_fluka.org>
Sent: Wednesday, December 5, 2018 3:45:53 AM
Subject: [fluka-discuss]: source.f with RESNUCLEI_IRREPROFIL cards

Hi dear FLUKA users

I am a new FLUKA user. In my pHD project, I have to model a proton beam from a space phase file.dat (created by a PIC code). I worked a lot on the source.f that I found on the e-archive. It works very well for cards like Dose,energy calculations. But when I add Resnuclei card to model target activation, TIMEOUT appears. I don't understand. Can we use a source.f added with IRREPROFIL/RESNUCLEI and DCYTIMES? When I try to add those cards, I change my source.f activating "radionucleides" but It might be a problem... I can't see the problem.

Thanks a lot



Julien

CELIA in FRANCE

__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id¬c_info
Received on Fri Dec 07 2018 - 10:24:47 CET

This archive was generated by hypermail 2.3.0 : Fri Dec 07 2018 - 10:24:55 CET