Hi Paola,
Here at BNL we have the same issue when trying to run fluka2020-0-3_linux-gfor64bit-8.3 (compiled with glibc 2.27) because it is not compatible with glibc 2.17 installed on our cluster. Unfortunately we cannot upgrade to a newer glibc because it would affect so many people using the cluster. We would appreciate if you could make available now and in the near future a fluka binary that is compatible with glib 2.17. We have gfortran 7.2 and 9.2 and binutils 2.29 installed on our cluster.
More specifically the run time error we get is:
Fortran runtime error: Incorrect extent in VALUE argument to DATE_AND_TIME intrinsic: is -2, should be >=8
Error termination. Backtrace:
#0 0x92d35f in datimf_
at /home/psala/releasefluka2020/fluprogfor/linuxmvax/datimf.f:55
#1 0x8365b4 in flukam_
at /home/psala/releasefluka2020/fluprogfor/mainmvax/flukam.f:1421
#2 0x4029cb in fluka
at /home/psala/releasefluka2020/fluprogfor/mainmvax/fluka.f:318
#3 0x4029cb in main
at /home/psala/releasefluka2020/fluprogfor/mainmvax/(USFLMD):23
Thanks you so much for your help and support,
Mo
--------
Dr. M. Benmerrouche, Ph.D., M.Sc., B.Sc.
Radiation Physicist
Brookhaven National Laboratory
Building 745
P.O. Box 5000
Upton, NY 11973-5000
Tel: 631-344-2068
Email: benmerrouche_at_bnl.gov
-----Original Message-----
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> On Behalf Of Answers
Sent: Sunday, June 14, 2020 10:56
To: María José García Fusté <mgarcia_at_cells.es>
Cc: fluka-discuss_at_fluka.org; Narcís Font Massot <narcis.font61_at_gmail.com>; Pau Carnicer Heras <pcarnicer_at_cells.es>
Subject: Re: [fluka-discuss]: Fwd: Re: Clasafety02 Subroutine
Hello
could indeed be a compiler/binutils/glibc mismatch problem.
Could you please specify which version of glibc and binutils you have?
(can be found with
ld --version
ldd --version )
Thanks
Paola
On Mon, 8 Jun 2020, María José García Fusté wrote:
> Good afternoon,
>
> At ALBA Synchrotron we have been using FLUKA smoothly without problems
> for a long time but we seem unable to install correctly the last
> version in our HPC cluster. I attach a summary of the steps undertaken
> to install FLUKA by our IT systems team and the error files that we
> get when trying to run a file that was already tested in previous versions and run succesfully.
>
> Any help would be highly appreciated, as we plan to endevour in some
> new Beamlines shielding calculations that cannot be done without the
> cluster,
>
> Thanks for your attention,
>
> Dr. Maria-Jose Garcia-Fuste
>
> --
>
>
> Ph.D María-José García-Fusté
>
> Radiation Protection Officer- Health & Safety Office
>
> ALBA SYNCHROTRON
> Carrer de la Llum 2-26 | 08290 | Cerdanyola del Vallès| Barcelona |
> Spain
> <https://urldefense.com/v3/__http://www.albasynchrotron.es/en/about/co
> ming-to-alba__;!!P4SdNyxKAPE!VfOGJYfcsElq0aBZLcsg_xvirkTRe7BwHzlSDf6-H
> WTNde2kY8gn3LmIF-mTHoNicV8$ >
> (+34) 93 592 4396 | mobile (+34) 649 609 968
> https://urldefense.com/v3/__http://www.albasynchrotron.es__;!!P4SdNyxK
> APE!VfOGJYfcsElq0aBZLcsg_xvirkTRe7BwHzlSDf6-HWTNde2kY8gn3LmIF-mTaNRjdO
> s$
> <https://urldefense.com/v3/__http://www.albasynchrotron.es__;!!P4SdNyxKAPE!VfOGJYfcsElq0aBZLcsg_xvirkTRe7BwHzlSDf6-HWTNde2kY8gn3LmIF-mTaNRjdOs$ >| mgarcia_at_cells.es <mailto:mgarcia_at_cells.es> | legal notice <https://urldefense.com/v3/__https://www.albasynchrotron.es/en/about/legal-notice__;!!P4SdNyxKAPE!VfOGJYfcsElq0aBZLcsg_xvirkTRe7BwHzlSDf6-HWTNde2kY8gn3LmIF-mTi_FCrq8$ > **Please, do not print this e-mail unless it is absolutely necessary.
> **Si heu rebut aquest correu per error, us informo que pot contenir
> informació confidencial i privada i que està prohibit el seu ús. Us
> agrairíem que ho comuniqueu al remitent i l'elimineu. Gràcies.
> Si ha recibido este correo por error, le informo de que puede contener
> información confidencial y privada y que está prohibido su uso. Le
> agradeceré que lo comunique a su remitente y lo elimine. Gracias.
> If you have received this e-mail in error, please note that it may
> contain confidential and private information, therefore, the use of
> this information is strictly forbidden. Please inform the sender of
> the error and delete the information received. Thank you.
>
>
> Fluka2020.0.3 Problem
>
> ==============
>
> Source:
> https://urldefense.com/v3/__https://www.fluka.org/packages/fluka2020.0
> -linux-gfor64bit-8.3-AA.tar.gz__;!!P4SdNyxKAPE!VfOGJYfcsElq0aBZLcsg_xv
> irkTRe7BwHzlSDf6-HWTNde2kY8gn3LmIF-mTa7_6kS8$
> File: fluka2020.0-linux-gfor64bit-8.3-AA.tar.gz
>
> We have installed Fluka 2020 with EasyBuild. Installed and compiled
> using GCC 8.3 with no errors:
>
> # Built with EasyBuild version 3.9.0 on 2020-04-21 easyblock =
> 'MakeCp'
>
> name = 'fluka'
> version = '2020.0'
> versionsuffix = '-gfor64bit-8.3-AA'
>
> homepage='https://urldefense.com/v3/__https://www.fluka.org/fluka.php?id=download&sub=packages__;!!P4SdNyxKAPE!VfOGJYfcsElq0aBZLcsg_xvirkTRe7BwHzlSDf6-HWTNde2kY8gn3LmIF-mTLn4v7yA$ '
> description = """FLUKA is a general purpose tool for calculations of
> particle transport and interactions with matter, covering an extended
> range of applications spanning from proton and electron accelerator
> shielding to target design, calorimetry, activation, dosimetry,
> detector design, Accelerator Driven Systems, cosmic rays, neutrino
> physics, radiotherapy etc"""
>
> toolchain = {'name': 'GCC', 'version':'8.3.0-2.32'} toolchainopts =
> {'noopt': True, 'strict': True}
>
> sources=['%s%s-linux%s.tar.gz' % (name.lower(), version,
> versionsuffix)]
>
> files_to_copy = ['*']
>
> sanity_check_paths = {
> 'files': ['flukahp','flukahp.map'],
> 'dirs': []
> }
>
> modextravars = {'FLUFOR': 'gfortran'}
> modextravars = {'FLUPRO': '%(installdir)s'} modextrapaths = {'PATH':
> 'flutil'} moduleclass = 'phys'
>
> With the old FLUKA version this method had worked correctly
> (2011.2x.6, 2011.2x-8). Now, when we try to "Run", we get try following message:
>
> Find error output files attached.
>
> Regards
>
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Jun 15 2020 - 16:53:23 CEST