Re: [fluka-discuss]: FLUKA with gfortran7

From: Alessandro Calamida <alex.calamida2_at_tiscalinet.it>
Date: Fri, 16 Apr 2021 15:41:58 +0200

Dear Stefan,

I checked for the two linkers and I found out that on the server that I
have the 2.25 version for the binutils and the 2.17 for the glibc. I
will try to ask for a newer version of this libraries but I think that
this will be an even harder mission to achieve.

Best reagards and thank you for your time, Alessandro Calamida.

Il 16/04/2021 13:48, Stefan E. Mueller ha scritto:
> Hi Alessandro -
>
> difficult to say. It fails at the linking stage - maybe there is a
> problem with the linker version?
>
> What do you get when you do
>
> ld --version
>
> and
>
> ldd --version
>
> ?
>
> This should give you the version of binutils package and glibc.
>
> FLUKA requires binutils 2.27 (or higher) and glibc version is
> specified as 2.32 for the GFortran 9.3 version (even though I
> installed with 2.31, and
> it also worked).
>
> Cheers,
>
> Stefan
>
> --
> Stefan E. Mueller
> Department of Information Services and Computing - Computational Science
> and Institute of Radiation Physics
> Helmholtz-Zentrum Dresden-Rossendorf
> Tel: +49 (0351) 260 3847
> Stefan.Mueller_at_hzdr.de
> http://www.hzdr.de
>
> Vorstand: Prof. Dr. Sebastian M. Schmidt, Dr. Diana Stiller
> Vereinsregister: VR 1693 beim Amtsgericht Dresden
>
> On Fri, 16 Apr 2021, Alessandro Calamida wrote:
>
>>
>> The option to activate the gcc9.3 compiler was very well hidden in the
>> manual. So, it was hard to find it. I activate the new gfortran9
>> compiler.
>> Then I gave the variable FLUFOR=gfortran and FLUGFOR=gfortran9. But
>> the make
>> process ended with this message:
>>
>>
>> /usr/bin/ld: final link failed: Bad value
>>
>>
>> The flukahp executable was not build. How can I fix it.
>>
>>
>> Unfortunately I have very few privileges on this server and I cannot use
>> sudo.
>>
>>
>> Best regards and thank you of your time, Alessandro Calamida.
>>
>>
>> Il 15/04/2021 20:32, Santana, Mario ha scritto:
>> Gfortran 8.4 will not work with gfortran 7 (or even with
>> gfortran 8.3x...).
>> The solution is to use an OS where you can use devtools-9 (or above),
>> such as centos7 (vs. older systems like rhel6). Many clusters have
>> different types of machines in the pools.
>>
>> -M
>>
>>
>> ____________________________________________________________________________
>>
>> From: owner-fluka-discuss_at_mi.infn.it on behalf of Stefan E. Mueller
>> Sent: Thursday, April 15, 2021 6:00 AM
>> To: Alessandro Calamida
>> Cc: fluka-discuss_at_fluka.org
>> Subject: Re: [fluka-discuss]: FLUKA with gfortran7
>> Dear Alessandro,
>>
>> there exists a FLUKA version for gfortran 8.4, did you try to use
>> this one with gfortran7?
>>
>> I have not tested it myself, but I had the feeling that
>> compatibility between different gfortran versions was slightly
>> improving
>> (but I could be wrong). So it might work.
>>
>> Cheers,
>>
>> Stefan
>>
>> --
>> Stefan E. Mueller
>> Department of Information Services and Computing - Computational
>> Science
>> and Institute of Radiation Physics
>> Helmholtz-Zentrum Dresden-Rossendorf
>> Tel: +49 (0351) 260 3847
>> Stefan.Mueller_at_hzdr.de
>> http://www.hzdr.de
>>
>> Vorstand: Prof. Dr. Sebastian M. Schmidt, Dr. Diana Stiller
>> Vereinsregister: VR 1693 beim Amtsgericht Dresden
>>
>> On Thu, 15 Apr 2021, Alessandro Calamida wrote:
>>
>> > Dear FLUKA experts,
>> >
>> > There is a way to have a FLUKA version working with gfortran7?
>> Beacause on
>> > the server that I am using, they have erased g77 compiler and they
>> had at
>> > maximum gofortran7. Installing gfortran9 manually is quite
>> impossible because
>> > I do not have sudo privileges. So, I cannot use FLUKA there anymore.
>> >
>> > Best regards and thank you for your time, Alessandro Calamida.
>> >
>> >
>> > --
>> > Questa e-mail stata controllata per individuare virus con Avast
>> antivirus.
>> > https://www.avast.com/antivirus
>> >
>> >
>> >
>> __________________________________________________________________________
>>
>> > You can manage unsubscription from this mailing list at
>> > https://www.fluka.org/fluka.php?id=acc_info
>> >
>> >
>>
>>
>> [icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
>> Mail priva di virus. www.avast.com
>>
>>

-- 
Questa e-mail  stata controllata per individuare virus con Avast antivirus.
https://www.avast.com/antivirus
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Apr 16 2021 - 17:39:10 CEST

This archive was generated by hypermail 2.3.0 : Fri Apr 16 2021 - 17:39:13 CEST