Re: [fluka-discuss]: The meaning of WHATs in the PHOTONUC card for SDUM=MUMUPRIM

From: Stefan E. Mueller <stefan.mueller_at_hzdr.de>
Date: Tue, 25 May 2021 17:12:29 +0200 (CEST)

Dear Hamideh Jalali,

from the manual, the meaning for the WHATs for SDUM=MUMUPRIM is the same
like for MUMUPAIR. Apparently, FLAIR does not implement this
(probably incorrectly so).

You can always resort to edit the FLUKA input file by hand using a text
editor (you can fill in the fields using SDUM=MUMUPAIR in FLAIR, then
change MUMUPAIR to MUMUPRIM in the SDUM).

Cheers,

         Stefan

--
Stefan E. Mueller
Department of Information Services and Computing - Computational Science
and Institute of Radiation Physics
Helmholtz-Zentrum Dresden-Rossendorf
Tel: +49 (0351) 260 3847
Stefan.Mueller_at_hzdr.de
http://www.hzdr.de
Vorstand: Prof. Dr. Sebastian M. Schmidt, Dr. Diana Stiller
Vereinsregister: VR 1693 beim Amtsgericht Dresden
On Tue, 25 May 2021, Hamideh Jalali wrote:
> Dear FLUKA experts
> 
> In the explanation of PHOTONUC card, FLUKA manual says: when selecting the
> SDUM=MUMUPAIR or MUMUPRIM the meaning of What(1) and What(2) change but in
> Flair, only when selecting MUMUPAIR the WHATs of PHOTONUC card change
> whereas for SDUM=MUMUPRIM, Flair shows the same WHATs as SDUM=ELECTNUC.
> 
> What are the correct meanings of WHATs for SDUM=MUMUPRIM?
> 
> Best Regards
> Hamideh
> 
>

__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Tue May 25 2021 - 18:49:03 CEST