Dear Paola
Please guide me how I can use the new version of FLUKA via WSL tool by
considering the notes that Luca has pointed out.
Best Regards
Hamideh
On Wed, May 19, 2021 at 7:57 AM <lucaj_at_babuhawaiifoundation.org> wrote:
> Hi Paola,
>
> Thanks to all of you for this new major update and I have just a question
> regarding the WSL Tool procedure.
> Usually the WSL procedure upload automatically all the new releases by
> itself ( Fluka, Flair and Fortran).
> With this separation tar file/ library Is the WSL going to take in
> consideration both files (library and tar) or Do I need to manually adjust
> the user routine to include the library too?
>
> Thanks again for your help and support.
>
> Best
> Luca J Tagliapietra
>
>
> -----Original Message-----
> From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> On
> Behalf Of Paola Sala
> Sent: Tuesday, May 18, 2021 11:28 AM
> To: fluka-discuss_at_fluka.org
> Cc: fluka-users_at_fluka.org
> Subject: [fluka-discuss]: Major new FLUKA release fluka2021.2 is out
>
> Dear FLUKA users
>
> Fluka-2021.2 is now available on the official Fluka web site (
> www.fluka.org).
>
> This is a revolutionary rather than evolutionary major release with plenty
> of additions/improvements both from the physics and technical side.
>
> New features are shortly listed below, and described in more detail in the
> release notes (attached to this message), and in the manual.
>
> Some of the features ** require modifications of the users routines **
> please read carefully if you have any.
>
> If you are using the tar files rather than the rpm's, please
> ** note that you have to download two files ** since all data libraries,
> which are common to all compilers/architectures are now provided in a
> separate file (see the README file and the list below)
>
> -- SHORT LIST OF NEW/CHANGED FEATURES --
>
> - Pointwise transport of low energy neutrons with correlated
> interactions is now available. A separate data file has to be
> downloaded (see README)
>
> - Runge-Kutta based transport in electric fields is implemented for
> vacuum and gas regions
>
> - Optional Runge-Kutta based transport in magnetic field in vacuum
> and gas regions (always active when noth magnetic and electric
> fields are present)
>
> - New physics model for coherent elastic scattering of hadrons on nuclei
>
> - New treatment for quasi-elastic scattering of hadrons on nuclei
>
> - Transport and in-flight decay of excited residual nuclei
>
> - Improved nuclear mass/decay/deexcitation database
>
> - Revised hadron-nucleus interaction cross sections
>
> - Revised cross sections for proton - light ion interactions
>
> - Non monochromatic scintillation light emission and transport
>
> - Delta resonance decay in photon+nucleon
>
> -- NEEDED MODIFICATIONS TO USER ROUTINES --
>
> - magfld.f has one more argument: time
>
> - source.f variables related to in-flight transport have to be
> initialized
>
> - mgdraw.f entry USDRAW: pay attention to quasielastic, flags
> available (see below)
>
> - mgdraw.f entry USDRAW: new interaction code for ion splitting events
>
> - new routines for non-monochromatic scintillation light (see manual)
>
> Please always refer to the updated templates in the usermvax directory.
>
> Given the amount and the importance of the new features, some quirks can
> be expected despite most of them are in extensive testing since several
> months within the FLUKA Collaboration. Please report any problem to
> fluka-discuss_at_fluka.org as usual.
>
> Given the amount of changes and the related need for adapting, the latest
> respin of Fluka2020.0, fluka2020.0.10, will be still available and its
> support assured for a few weeks.
>
> The FLUKA Authors and all their collaborators wish you a pleasant
> experience with the new release!
>
>
>
> Warning: if you see this message in the *1ST* cycle of a series, don't
> worry!
>
> !!!!!!!!!! Seed file not accepted: or corrupted or main seed not matching
> the requested one !!!!!!!!!!
>
> It is immaterial, it simply tells you that the initial seed has to be
> created from scratch because the default one does not match what you asked
> for in the RANDOMIZ card
>
> If you see it in the 2nd, 3rd cycle..then DO worry!
>
>
>
> Available files:
>
> Rpm's:
>
> fluka-2021.2-0.x86_64.rpm (Linux, gfortran-10.3, 64
> bit)
> fluka-2021.2-0.i686.rpm (Linux, g77, 32 and 64 bit)
>
> Tar files:
>
> fluka2021.2-data.tar.gz (Data, required by all other
> tar files)
> fluka2021.2-linux-gfor64bitAA.tar.gz (Linux, gfortran-10.3, 64
> bit)
> fluka2021.2-linux-gfor64bit-9.3-AA.tar.gz (Linux, gfortran-9.3, 64
> bit)
> fluka2021.2-linux-gfor64bit-8.4-AA.tar.gz (Linux, gfortran-8.4, 64
> bit)
> fluka2021.2-linuxAA.tar.gz (Linux, g77, 32 and 64 bit)
> fluka2021.2-mac-gfor64bit-10.2-AA.tar.gz (Mac , gfortran-10.2, 64
> bit)
> fluka2021.2-mac-gfor64bit-9.3-AA.tar.gz (Mac , gfortran-9.3, 64
> bit)
> fluka2021.2-mac-gfor64bit-8.4-AA.tar.gz (Mac , gfortran-8.4, 64
> bit)
>
>
>
>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Sun May 30 2021 - 12:38:34 CEST