Dear Leena,
this simply means the ustsuw executable needed to process the USRTRACK
output files is missing. Normally it should be produced as you issue the
command "make" from the $FLUPRO directory, and is located in
$FLUPRO/flutil together with the other postprocessing tools
Cheers
Francesco
**************************************************
Francesco Cerutti
CERN-EN/STI
CH-1211 Geneva 23
Switzerland
tel. ++41 22 7678962
fax ++41 22 7668854
On Thu, 30 Sep 2010, L.Al-Sulaiti_at_surrey.ac.uk wrote:
> Hello Francesco,
>
> Thank you very much for your help. The USRTRACK results have been obtained but only when I use another machine. I still have an error on ploting using my PC. The usetrack files were not created during processing. The error was '' /bin/sh: /home/la0040/fluka/flutil/ustsuw: not found ''. Could you please help. Do I need to re-install FLUKA.
>
> Best regards
> Leena
>
> ________________________________________
> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] On Behalf Of Francesco Cerutti [Francesco.Cerutti_at_cern.ch]
> Sent: 20 September 2010 15:10
> To: Al-Sulaiti L Ms (PG/R - Physics)
> Cc: msantana_at_SLAC.Stanford.EDU; fluka-discuss_at_fluka.org
> Subject: RE: fluence spectra
>
> Dear Leena,
>
> 1. there are still errors in your geometry. You must remove the B16
> cylinder from the first zone of the AR2 region, in order to avoid region
> overlap
>
> 2. the culprit of the failing USRTRACK scoring seems to be just a "H"
> which took the place of a "R". If you ask for PROTON instead of PHOTON,
> you will get the spectrum evolution as in attachment.
> Note that the integrated fluence takes very low values and its decrease
> along the six water target segments is anomalous (one would not expect
> such a large reduction in the last half cm). This is due to the fact that
> indeed only a tiny fraction of your beam impacts the target, since you
> make it travelling a quite long path in air (and so it obviously gets
> scattered)
>
> All the best
>
> Francesco
>
> **************************************************
> Francesco Cerutti
> CERN-EN/STI
> CH-1211 Geneva 23
> Switzerland
> tel. ++41 22 7678962
> fax ++41 22 7668854
Received on Thu Sep 30 2010 - 17:57:56 CEST
This archive was generated by hypermail 2.2.0 : Thu Sep 30 2010 - 17:58:03 CEST