Re: Flair example

Dear David,

for some strange reasons, in your case the command
make all
is invoking gfortran instead of g77 (the only compiler compatible with the
distributed version). I puzzle over the fact that you correctly got the
FLUKA executable (flukahp in $FLUPRO=/home/dcereceda/phD/FLUKA/Flukacode).

In order to generate the needed executables of the postprocessing tools,
you might try to type in flutil the commands like
$FLUPRO/flutil/lfluka -o ustsuw ustsuw.f

Ciao
Francesco

**************************************************
Francesco Cerutti
CERN-EN/STI
CH-1211 Geneva 23
Switzerland
tel. ++41 22 7678962
fax ++41 22 7668854

On Thu, 16 Dec 2010, d.cereceda_at_alumnos.upm.es wrote:

> Dear all,
>
> thank you very much for your help and information
>
> I tried to solve the problem I had with "Data merging" in flair last
> week with your advices, but I could not.
>
> When I press the bottom "process" it appears the errors I showed in my
> first mail, and the output window also shows (for usrbin, usrcoll,
> resnuclei), and I have checked that I have the file in that location
>
> Error processing: tutorial_usrbin_50
>
> Processing: tutorial_usrcoll_51
> cmd=/home/dcereceda/phD/FLUKA/Flukacode/flutil/ustsuw
>>>> tutorial002_fort.51
>>>> tutorial005_fort.51
>>>> tutorial004_fort.51
>>>> tutorial003_fort.51
>>>> tutorial001_fort.51
>
> I have also tried to do what you suggested me, but I can not type the
> order "make all". I get the errors showed in the second attached
> snapshot
>
> I have all the ".f" in the correct directory but I can not obtain the
> programs without the ".f" extensions
>
> Do you know what could I do?
>
> thanks again,
>
> best
>
> david
>
>
>
>
> Con fecha 17/11/2010, " DAVID CERECEDA SEÑAS "
> <d.cereceda_at_alumnos.upm.es> escribió:
>
>> Dear all FLUKA and FLAIR users,
>>
>> My name is David Cereceda and I am a new FLUKA/FLAIR user from Madrid.
>> There is no one capable to help me with my initials steps here at my
>> Institute and I have some problems trying to solve the Quick Start Flair
>> Example.
>>
>> When I create the input and I complete it, I don't have any problem with
>> the debugging, with the geometry plot (I obtain it) and the running
>> says "Finish Ok". I also visualize the output files and it seems to be
>> correct (I attach you an image), but when I try to do the data merging
>> (I attach you the screen) by pressing the "Process" button, I get some
>> errors.
>>
>> "Please check output for possible errors on files: tutorial_usrbin_50"
>>
>> "No files were created"
>>
>> Should you can help me, I would appreciate too much
>>
>> Should you need any additional information (project file,...),please, let
>> me know
>>
>> thanks and best,
>>
>> david
>
--8323328-1180808337-1292627409=:406--
Received on Sat Dec 18 2010 - 12:51:28 CET