On 14.03.2014 13:03, luca_unimib wrote:
> Dear Users,
> I am a newer.
> I have the same problem of Natanael,
>
> I am trying t instal the 64bit version which I have downloaded from
> the fluka website.
> fluka2011.2b-linux-gfor64bitAA
>
> the installation stop and:
>
> %%%%%%%%%%%%%%%%%%%
> gfortran -o actdline actdline.o
> /usr/bin/ld: i386 architecture of input file `actdline.o' is
> incompatible with i386:x86-64 output
> %%%%%%%%%%%%%%%%%%
>
> what I can do to solve this problem
> thanks a lot and nice to joint the community !
> Ciao
> Luca
>
>
> On 03/14/2014 07:17 AM, Vittorio Boccone wrote:
>> Hi Natanael,
>> then you clearly missed the definition of the FLUFOR (and if need
>> the additional GFORFLU in case is needed) as specified in the
>> installation instructions
>>
>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>
>> * FLUFOR (optional): containing the compiler type (*gfortran* or
>> *g77*) which must be coherent with the architecture of the
>> package you downloaded.
>> If you work on *bash* do:
>> > export FLUFOR=g77
>> or
>> > export FLUFOR=gfortran
>>
>> Best V.
>>
>>
>> On Fri, Mar 14, 2014 at 7:17 AM, Vittorio Boccone
>> <dr.vittorio.boccone_at_ieee.org <mailto:dr.vittorio.boccone_at_ieee.org>>
>> wrote:
>>
>> Hi Natanael,
>> then you clearly missed the definition of the FLUFOR (and if
>> need the additional GFORFLU in case is needed) as specified in
>> the installation instructions
>>
>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>
>> * FLUFOR (optional): containing the compiler type
>> (*gfortran* or *g77*) which must be coherent with the
>> architecture of the package you downloaded.
>> If you work on *bash* do:
>>
>> > export FLUFOR=g77
>>
>> or
>>
>> > export FLUFOR=gfortran
>>
>> Best V.
>>
>>
>> On Thu, Mar 13, 2014 at 10:27 PM, <nm00219_at_surrey.ac.uk
>> <mailto:nm00219_at_surrey.ac.uk>> wrote:
>>
>>
>> Dear Vittorio,
>>
>> Thank you so much for the quick reply!
>> No not at all I just want the simple x64 installation no 32
>> bits. I believe I have gfortran already. But I made double
>> sure I got the 64 bits version in both cases I don't
>> understand...
>>
>> Best,
>> Nat
>>
>> Sent from Samsung Mobile
>>
>>
>> -------- Original message --------
>> From: Vittorio Boccone
>> Date:13/03/2014 9:18 PM (GMT+00:00)
>> To: "Mota NCD Mr (PG/T - Physics)" ,fluka-discuss_at_fluka.org
>> <mailto:fluka-discuss_at_fluka.org>
>> Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
>>
>> Hi Natanael,
>> I suggested you to install the 64 bit version with gfortran
>> instead, you are still trying to compile the 32 bit version
>> on a 64 bit machine. This can be done but if you want to
>> compile/link 32-bit packages, you need to install a minimal
>> set of 32-bit packages (at least what in the Scientific linux
>> and Fedora are the packages called glibc-devel.i686 libgcc.i686)
>>
>> /usr/bin/ld: cannot find crt1.o: No such file or directory
>> -> means that the compat lib are not complete
>>
>> I suggested you to try the gfortran version as it works out
>> of the box (you only have to install gfortran with a sudo
>> apt-get install gfortran)
>>
>> Do you really need the 32 bit version for some legacy
>> application?
>>
>> Best,
>> V.
>>
>>
>> On Thu, Mar 13, 2014 at 8:40 PM, <nm00219_at_surrey.ac.uk
>> <mailto:nm00219_at_surrey.ac.uk>> wrote:
>>
>> Dear Vittorio,
>>
>>
>> I did as you said, and I faced another error. Please
>> check the log.
>>
>>
>> Best,
>>
>> Nat
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Vittorio Boccone <dr.vittorio.boccone_at_ieee.org
>> <mailto:dr.vittorio.boccone_at_ieee.org>>
>> *Sent:* Wednesday, March 05, 2014 11:44 PM
>> *To:* Mota NCD Mr (PG/T - Physics); Mary Chin
>> *Cc:* fluka-discuss_at_fluka.org
>> <mailto:fluka-discuss_at_fluka.org>
>> *Subject:* Re: [fluka-discuss]: Ubunto 13.10 64 bits
>> installation
>> Dear Natanael,
>> form the short log you sent it seems you downloaded the
>> 32bit (g77) version of the code while you are trying to
>> compile it in 64 bit mode with gfortran.
>>
>> > gfortran -o actdline actdline.o
>> > /usr/bin/ld: i386 architecture of input file
>> `actdline.o' is incompatible with i386:x86-64 output
>>
>> For the installation/download refer to
>> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>>
>> Please try to download and compile this instead
>> https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz
>>
>> Best,
>> V.
>>
>>
>> On Wed, Mar 5, 2014 at 6:23 PM, <nm00219_at_surrey.ac.uk
>> <mailto:nm00219_at_surrey.ac.uk>> wrote:
>>
>> Dear Sir/Madam,
>>
>>
>> I have been trying to install fluka and flair on my
>> 64 bits Ubunto 13.10 system. I have already acquired
>> g77 ( just in case) and gfortran along with some
>> flair packages, but whenever I hit make for the fluka
>> installation it doesn't compile properly. I've been
>> guiding myself with this site
>> https://twiki.cern.ch/twiki/bin/view/Sandbox/HCALRadiationProject
>> and the readme file, with little sucess due to my
>> system's architecture and operating system. The bash
>> verbose is attached.
>>
>> I would deeply appreciate a user friendly set of
>> instructions from step 0.
>>
>> Best regards,
>> Natanael Mota
>>
>>
>>
>>
>>
>>
>
>
> --
> --------------------------------------------------------
> Luca Volpe
> --Centre Lasers Intenses et Applications Université Bordeaux 1
> 351, Cours de la Liberation 33405 Talence cedex, (Fr)
> +33(0)5 40 40 37 62; +33(0)6 11 97 09 14;
> volpe_at_celia.u-bordeaux1.fr
> --Università di Milano-Bicocca
> Piazza della Scienza 3, 20133 Milano (It)
> +39 0264482351 ;+39-3402940744
> luca.volpe_at_mib.infn.it
> --------------------------------------------------------
Dear Luca,
I'm using slackware-current with gcc-4.8.2 multilib (c,c++,fortran).
Try to add to .bashrc file in your home directory strings as:
export FLUPRO=/path/to/fluka
export FLUFOR=/path/to/fortran
my values are:
export FLUPRO=$HOME/fluka
export FLUFOR=gfortran
Then in command line execute "source .bashrc" and try to compile fluka
again.
Best regards.
Received on Fri Mar 14 2014 - 12:24:45 CET