Re: [fluka-discuss]: Another begining question

From: Francesco Cerutti <Francesco.Cerutti_at_cern.ch>
Date: Fri, 14 Mar 2014 12:29:11 +0100

Dear Reyes

actually I see that the solutions (in terms of .inp and .flair files) are
available on the course website
http://www.fluka.org/fluka.php?id=course&sub=program&navig=2&which=dresden2013

If you refer specifically to the four questions of Exercise 1, you are
right: the answers are not reported ... but two of them (#1 and #3) are
explicitly written in the resulting output file and the even ones come
from elementary multiplications. In case of doubts, let us know

Cheers

Francesco

**************************************************
Francesco Cerutti
CERN-EN/STI
CH-1211 Geneva 23
Switzerland
tel. ++41 22 7678962
fax ++41 22 7668854

On Fri, 14 Mar 2014, Reyes Alemany Fernandez wrote:

>
> Dear Fluka collaborators,
>
>  
>
> Yesterday I installed FLUKA. I'm following now the FLUKA course (DRESDEN
> last year). I maganged to run the first exercise and it is mention that the
> solution to the exercises are availble, but I cannot find them in the web
> (seems normal otherwise).
>
> Does anybody have the solution to the exercises and could you give them to
> me?
>
>  
>
> Thanks very much in advance,
>
> Reyes
>
> ____________________________________________________________________________
> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on
> behalf of "Mikhail Polkovnikov <Михаил Полковников>" [pmk_at_ihep.ru]
> Sent: 14 March 2014 11:17
> To: luca_unimib; fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
>
> On 14.03.2014 13:03, luca_unimib wrote:
> Dear Users,
> I am a newer.
> I have the same problem of Natanael,
>
> I am trying t instal the 64bit version which I have downloaded
> from the fluka website.
> fluka2011.2b-linux-gfor64bitAA
>
> the installation stop and:
>
> %%%%%%%%%%%%%%%%%%%
> gfortran  -o actdline actdline.o
> /usr/bin/ld: i386 architecture of input file `actdline.o' is
> incompatible with i386:x86-64 output
> %%%%%%%%%%%%%%%%%%
>
> what I can do to solve this problem
> thanks a lot and nice to joint the community !
> Ciao
> Luca
>
>
> On 03/14/2014 07:17 AM, Vittorio Boccone wrote:
> Hi Natanael,
>  then you clearly missed the definition of the FLUFOR (and
> if need the additional GFORFLU in case is needed) as
> specified in the installation instructions 
>
> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
> * FLUFOR (optional): containing the compiler type
> (gfortran or g77) which must be coherent with the
> architecture of the package you downloaded.
> If you work on bash do:
>
> > export FLUFOR=g77
> or
>
> > export FLUFOR=gfortran
> Best V.
>
>
> On Fri, Mar 14, 2014 at 7:17 AM, Vittorio Boccone
> <dr.vittorio.boccone_at_ieee.org> wrote:
> Hi Natanael,
>  then you clearly missed the definition of
> the FLUFOR (and if need the additional GFORFLU in
> case is needed) as specified in the installation
> instructions 
>
> http://www.fluka.org/fluka.php?id=ins_run&mm2=3
> * FLUFOR (optional): containing the compiler type
> (gfortran or g77) which must be coherent with the
> architecture of the package you downloaded.
> If you work on bash do:
>
> > export FLUFOR=g77
> or
>
> > export FLUFOR=gfortran
> Best V.
>
>
> On Thu, Mar 13, 2014 at 10:27 PM, <nm00219_at_surrey.ac.uk>
> wrote:
>
> Dear Vittorio, 
>
> Thank you so much for the quick reply! 
> No not at all I just want the simple x64
> installation no 32 bits. I believe I have gfortran
> already.  But I made double sure I got the 64 bits
> version in both cases I don't understand... 
>
> Best, 
> Nat 
>
> Sent from Samsung Mobile
>
>
> -------- Original message --------
> From: Vittorio Boccone
> Date:13/03/2014 9:18 PM (GMT+00:00)
> To: "Mota NCD Mr (PG/T - Physics)"
> ,fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits
> installation
>
> Hi Natanael, I suggested you to install the 64 bit
> version with gfortran instead, you are still trying
> to compile the 32 bit version on a 64 bit machine.
> This can be done but if you want to compile/link
> 32-bit packages, you need to install a minimal set
> of 32-bit packages (at least what in the Scientific
> linux and Fedora are the packages called
> glibc-devel.i686 libgcc.i686)
>
> /usr/bin/ld: cannot find crt1.o: No such file or
> directory -> means that the compat lib are not
> complete 
>
> I suggested you to try the gfortran version as it
> works out of the box (you only have to install
> gfortran with a sudo apt-get install gfortran)
>
> Do you really need the 32 bit version for some
> legacy application?
>
> Best, 
>  V.
>
>
> On Thu, Mar 13, 2014 at 8:40 PM,
> <nm00219_at_surrey.ac.uk> wrote:
>
> Dear Vittorio,
>
>
> I did as you said, and I faced another
> error. Please check the log.
>
>
> Best,
>
> Nat
>
>
>
> ____________________________________________________________________________
> From: Vittorio Boccone
> <dr.vittorio.boccone_at_ieee.org>
> Sent: Wednesday, March 05, 2014 11:44 PM
> To: Mota NCD Mr (PG/T - Physics); Mary
> Chin
> Cc: fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: Ubunto
> 13.10 64 bits installation  
> Dear Natanael,
>  form the short log you sent it seems you
> downloaded the 32bit (g77) version of the code
> while you are trying to compile it in 64 bit
> mode with gfortran.
>
> > gfortran  -o actdline actdline.o
> > /usr/bin/ld: i386 architecture of input file
> `actdline.o' is incompatible with i386:x86-64
> output
>
> For the installation/download refer
> to http://www.fluka.org/fluka.php?id=ins_run&mm2=3
>
> Please try to download and compile this
> instead
> https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz
>
> Best, 
> V.
>
>
> On Wed, Mar 5, 2014 at 6:23 PM,
> <nm00219_at_surrey.ac.uk> wrote:
>
> Dear Sir/Madam, 
>
>
> I have been trying to install
> fluka and flair on my 64 bits
> Ubunto 13.10 system. I have
> already acquired g77 ( just in
> case) and gfortran along with some
> flair packages, but whenever I hit
> make for the fluka installation it
> doesn't compile properly. I've
> been guiding myself with this
> site https://twiki.cern.ch/twiki/bin/view/Sandbox/HCALRadiationProject
> and the readme file, with little
> sucess due to my system's
> architecture and operating system.
> The bash verbose is attached. 
>
> I would deeply appreciate a user
> friendly set of instructions from step
> 0. 
>
> Best regards,
> Natanael Mota
>
>
>
>
>
>
>
>
> --
> --------------------------------------------------------
> Luca Volpe
> --Centre Lasers Intenses et Applications Université Bordeaux 1
> 351, Cours de la Liberation 33405 Talence cedex, (Fr)
> +33(0)5 40 40 37 62; +33(0)6 11 97 09 14;
> volpe_at_celia.u-bordeaux1.fr
> --Università di Milano-Bicocca
> Piazza della Scienza 3, 20133 Milano (It)
> +39 0264482351 ;+39-3402940744
> luca.volpe_at_mib.infn.it
> --------------------------------------------------------
>
> Dear Luca,
>
> I'm using slackware-current with gcc-4.8.2 multilib (c,c++,fortran).
>
> Try to add to .bashrc file in your home directory strings as:
>
> export FLUPRO=/path/to/fluka
> export FLUFOR=/path/to/fortran
>
> my values are:
> export FLUPRO=$HOME/fluka
> export FLUFOR=gfortran
>
> Then in command line execute "source .bashrc" and try to compile fluka
> again.
>
> Best regards.
>
>
Received on Fri Mar 14 2014 - 13:28:39 CET

This archive was generated by hypermail 2.3.0 : Fri Mar 14 2014 - 13:28:40 CET