Dear Fluka collaborators,
Yesterday I installed FLUKA. I'm following now the FLUKA course (DRESDEN last year). I maganged to run the first exercise and it is mention that the solution to the exercises are availble, but I cannot find them in the web (seems normal otherwise).
Does anybody have the solution to the exercises and could you give them to me?
Thanks very much in advance,
Reyes
________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of "Mikhail Polkovnikov <Михаил Полковников>" [pmk_at_ihep.ru]
Sent: 14 March 2014 11:17
To: luca_unimib; fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
On 14.03.2014 13:03, luca_unimib wrote:
Dear Users,
I am a newer.
I have the same problem of Natanael,
I am trying t instal the 64bit version which I have downloaded from the fluka website.
fluka2011.2b-linux-gfor64bitAA
the installation stop and:
%%%%%%%%%%%%%%%%%%%
gfortran -o actdline actdline.o
/usr/bin/ld: i386 architecture of input file `actdline.o' is incompatible with i386:x86-64 output
%%%%%%%%%%%%%%%%%%
what I can do to solve this problem
thanks a lot and nice to joint the community !
Ciao
Luca
On 03/14/2014 07:17 AM, Vittorio Boccone wrote:
Hi Natanael,
then you clearly missed the definition of the FLUFOR (and if need the additional GFORFLU in case is needed) as specified in the installation instructions
http://www.fluka.org/fluka.php?id=ins_run&mm2=3
* FLUFOR (optional): containing the compiler type (gfortran or g77) which must be coherent with the architecture of the package you downloaded.
If you work on bash do:
> export FLUFOR=g77
or
> export FLUFOR=gfortran
Best V.
On Fri, Mar 14, 2014 at 7:17 AM, Vittorio Boccone <dr.vittorio.boccone_at_ieee.org<mailto:dr.vittorio.boccone_at_ieee.org>> wrote:
Hi Natanael,
then you clearly missed the definition of the FLUFOR (and if need the additional GFORFLU in case is needed) as specified in the installation instructions
http://www.fluka.org/fluka.php?id=ins_run&mm2=3
* FLUFOR (optional): containing the compiler type (gfortran or g77) which must be coherent with the architecture of the package you downloaded.
If you work on bash do:
> export FLUFOR=g77
or
> export FLUFOR=gfortran
Best V.
On Thu, Mar 13, 2014 at 10:27 PM, <nm00219_at_surrey.ac.uk<mailto:nm00219_at_surrey.ac.uk>> wrote:
Dear Vittorio,
Thank you so much for the quick reply!
No not at all I just want the simple x64 installation no 32 bits. I believe I have gfortran already. But I made double sure I got the 64 bits version in both cases I don't understand...
Best,
Nat
Sent from Samsung Mobile
-------- Original message --------
From: Vittorio Boccone
Date:13/03/2014 9:18 PM (GMT+00:00)
To: "Mota NCD Mr (PG/T - Physics)" ,fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
Hi Natanael,
I suggested you to install the 64 bit version with gfortran instead, you are still trying to compile the 32 bit version on a 64 bit machine. This can be done but if you want to compile/link 32-bit packages, you need to install a minimal set of 32-bit packages (at least what in the Scientific linux and Fedora are the packages called glibc-devel.i686 libgcc.i686)
/usr/bin/ld: cannot find crt1.o: No such file or directory -> means that the compat lib are not complete
I suggested you to try the gfortran version as it works out of the box (you only have to install gfortran with a sudo apt-get install gfortran)
Do you really need the 32 bit version for some legacy application?
Best,
V.
On Thu, Mar 13, 2014 at 8:40 PM, <nm00219_at_surrey.ac.uk<mailto:nm00219_at_surrey.ac.uk>> wrote:
Dear Vittorio,
I did as you said, and I faced another error. Please check the log.
Best,
Nat
________________________________
From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org<mailto:dr.vittorio.boccone_at_ieee.org>>
Sent: Wednesday, March 05, 2014 11:44 PM
To: Mota NCD Mr (PG/T - Physics); Mary Chin
Cc: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: Re: [fluka-discuss]: Ubunto 13.10 64 bits installation
Dear Natanael,
form the short log you sent it seems you downloaded the 32bit (g77) version of the code while you are trying to compile it in 64 bit mode with gfortran.
> gfortran -o actdline actdline.o
> /usr/bin/ld: i386 architecture of input file `actdline.o' is incompatible with i386:x86-64 output
For the installation/download refer to
http://www.fluka.org/fluka.php?id=ins_run&mm2=3
Please try to download and compile this instead
https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz
Best,
V.
On Wed, Mar 5, 2014 at 6:23 PM, <nm00219_at_surrey.ac.uk<mailto:nm00219_at_surrey.ac.uk>> wrote:
Dear Sir/Madam,
I have been trying to install fluka and flair on my 64 bits Ubunto 13.10 system. I have already acquired g77 ( just in case) and gfortran along with some flair packages, but whenever I hit make for the fluka installation it doesn't compile properly. I've been guiding myself with this site
https://twiki.cern.ch/twiki/bin/view/Sandbox/HCALRadiationProject and the readme file, with little sucess due to my system's architecture and operating system. The bash verbose is attached.
I would deeply appreciate a user friendly set of instructions from step 0.
Best regards,
Natanael Mota
--
--------------------------------------------------------
Luca Volpe
--Centre Lasers Intenses et Applications Université Bordeaux 1
351, Cours de la Liberation 33405 Talence cedex, (Fr)
+33(0)5 40 40 37 62; +33(0)6 11 97 09 14;
volpe_at_celia.u-bordeaux1.fr<mailto:volpe_at_celia.u-bordeaux1.fr>
--Università di Milano-Bicocca
Piazza della Scienza 3, 20133 Milano (It)
+39 0264482351 ;+39-3402940744
luca.volpe_at_mib.infn.it<mailto:luca.volpe_at_mib.infn.it>
--------------------------------------------------------
Dear Luca,
I'm using slackware-current with gcc-4.8.2 multilib (c,c++,fortran).
Try to add to .bashrc file in your home directory strings as:
export FLUPRO=/path/to/fluka
export FLUFOR=/path/to/fortran
my values are:
export FLUPRO=$HOME/fluka
export FLUFOR=gfortran
Then in command line execute "source .bashrc" and try to compile fluka again.
Best regards.
Received on Fri Mar 14 2014 - 12:50:24 CET