[fluka-discuss]: Time of arrival

From: Helga Holmestad <helga.holmestad_at_cern.ch>
Date: Thu, 15 Jan 2015 08:50:31 +0000

Dear experts

What is the best way to find the time of arrival on a detector on an event by event basis.

The setup is:
I have a straight beam of anti-protons at 5.3 MeV.
The antiprotons first goes trough an aliminum foil, this makes the antiprotons have different energy and they are cattered. Then they go trough a thin collimator, and because of the scattering some will annihilate on the walls of the collimator. The collimator has a length of 20 cm, and the detector is placed 40 cm away from the end of the collimator. I need to find the time of arrival on the detector, both if an antiproton hits the detector or if a fragment from a decay in the collimator arrives at the detector.

I have attached the inputfile I am using

Best regards,

You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Jan 15 2015 - 11:32:39 CET

This archive was generated by hypermail 2.3.0 : Thu Jan 15 2015 - 11:32:40 CET