[fluka-discuss]: Mixed normalization in Residual Dose Rate results

From: Mina Nozar <nozarm_at_triumf.ca>
Date: Wed, 01 Apr 2015 14:20:27 -0700

Hello everyone,

I am working on a project that involves two targets and two beams in the
same target station area. One beam is a 50 kW proton beam and another
is a 500 kW electron beam. See the attached image please.

This figure shows the prompt dose rates from the combined results of
both sets of runs, one for the proton beam and one for the electron
beam. However, as you can see, the results are shown in the raw units
of pSv/prim. In order to show results in uSv/h ---> Sv/h, I would need
to apply a different normalization to each set of binary files generated
via usbsuw.

Is there a way to do this mixed normalization at the usbsuw stage when
merging the two sets of files from each run?


Thanks in advance,
Mina





__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Normalization.png
(image/png attachment: Normalization.png)

Received on Thu Apr 02 2015 - 00:45:32 CEST

This archive was generated by hypermail 2.3.0 : Thu Apr 02 2015 - 00:45:38 CEST