Re: [fluka-discuss]: source compilation and link problem

From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
Date: Tue, 16 Jun 2015 15:43:12 +0200

Ok, in this case moving to fff from sh to bash would help.
V.

On Thu, Jun 11, 2015 at 6:53 AM, <sandipan_at_barc.gov.in> wrote:

> Dear sir,
>
> Again a big thanks for your kind reply.
>
> I think , that I have the link between awk and gawk(/usr/bin/awk-->
> /etc/alternatives/awk--> /usr/bin/gawk). I have done the
> update-alternatives and its leading me gawk(auto mode). I have attached
> the screen shot. And i am not able to remove mawk by any means because
>
>
> dpkg: error processing package mawk (--remove):
> dependency problems - not removing
> Errors were encountered while process
>
> But till the [[: problem is there.
>
> Am i missing something? please help.
>
> in anticipation of not bothering you
>
> Regards
> Sandipan
>
>
>
>
> > Dear Sandipan, you need to check that the first found awk in the path is
> > bringing you to gawk.
> >
> > This command:
> > sudo update-alternatives --config awk
> > Will help you configuring the alternatives for the awk pack.
> >
> > This can be achieved also by removing mawk pack with the dpkg command.
> > Best, V.
> > On Jun 10, 2015 10:46 AM, <sandipan_at_barc.gov.in> wrote:
> >
> >> Dear Sir,
> >>
> >> Thank you for your kind reply and sorry to disturb you repeated times .
> >> but the problem till persists. Though I have installed gawk long time
> >> ago
> >> , but till the "[[" error is there. I have attached the screen shot.
> >>
> >> And Sir , I have attached my fff script also for your verification , if
> >> any other change is required.
> >>
> >> Thank you in advance
> >> Sandipan
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> > Dear Sandipan,
> >> > without any hesitation I can recommend you to revert the first
> >> > modification
> >> > (#!/bin/bash -> #!/bin/sh).
> >> >
> >> > There is more than meets the eye in $FLUPRO/flutils/fff (as also in
> >> the
> >> > other scrips in $FLUPRO/flutils/), and this modification is indeed
> >> what
> >> is
> >> > causing you the trouble.
> >> >
> >> > The "[[" problem is caused by the *awk* flavour/version which is
> >> installed
> >> > by default on the Ubuntu's versions - *mawk* -
> >> > *mawk* conforms only the POSIX standards, on the contrary of the gawk
> >> > implementation which support also the GNU standards and is more
> >> commonly
> >> > used in Linux distributions.
> >> >
> >> > A solution to this problem was already posted here.
> >> > http://www.fluka.org/web_archive/earchive/new-fluka-discuss/6448.html
> >> >
> >> > Best,
> >> > Vittorio
> >> >
> >> > On Tue, Jun 9, 2015 at 6:40 AM, <sandipan_at_barc.gov.in> wrote:
> >> >
> >> >> Dear Sir,
> >> >>
> >> >> Thank you for your kind reply. Actually the problem is same for all
> >> the
> >> >> source.f files , even for the model source I got in the forum. I have
> >> >> attached the sources.
> >> >>
> >> >> Just to inform you , I have changed two points of fff script.
> >> >>
> >> >> 1. I have changed #!/bin/sh to #!/bin/bash to get rid of [[ problem.
> >> >>
> >> >> 2. I have changed FLUFOR=gfortran in the script.
> >> >>
> >> >> Waiting for your reply.
> >> >>
> >> >> Thanks in advance
> >> >> Sandipan
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> > Dear Sandipan,
> >> >> > there might be a part of your code (cf252.f) where you use string
> >> >> > shorted
> >> >> > than what expected.
> >> >> > In order to reproduce the issue it would be nice if you could send
> >> >> over
> >> >> > your source file (if you can)
> >> >> > Best,
> >> >> > Vittorio
> >> >> >
> >> >> > On Mon, Jun 8, 2015 at 8:19 AM, <sandipan_at_barc.gov.in> wrote:
> >> >> >
> >> >> >>
> >> >> >> Dear Fluka Experts,
> >> >> >>
> >> >> >> I am using Ubuntu 14.04 and installed
> >> >> >> fluka2011.2c-linux-gfor64bitAA.tar.gz . Now though I am able to
> >> >> >> successfully compile a source.f card (gfortran compiler) through
> >> >> flair
> >> >> >> and
> >> >> >> executable file is successfully built (FLAIR NOTIFICATION) &
> >> attached
> >> >> >> with
> >> >> >> I/P file , but while running this file is being ignored and output
> >> is
> >> >> >> according to the maximum energy put in the beam card only .
> >> >> >>
> >> >> >>
> >> >> >> While running through terminal it gets terminated with following
> >> >> error
> >> >> >> ::
> >> >> >> "At line 25 of file actdline.f Fortran runtime error: Actual
> >> string
> >> >> >> length
> >> >> >> is shorter than the declared one for dummy argument 'card'
> >> (72/132)".
> >> >> >> This error is same for all different source.f files.
> >> >> >>
> >> >> >> Could you please suggest a solution?
> >> >> >>
> >> >> >> Thanks to everyone in the community -
> >> >> >>
> >> >> >> Regards
> >> >> >> Sandipan
> >> >> >
> >> >>
> >> >
> >>
> >
>


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Tue Jun 16 2015 - 17:18:40 CEST

This archive was generated by hypermail 2.3.0 : Tue Jun 16 2015 - 17:18:43 CEST