Re: [fluka-discuss]: source compilation and link problem

From: <sandipan_at_barc.gov.in>
Date: Wed, 17 Jun 2015 10:41:46 +0530

Dear Sir,

Many many thanks. At last the issue is solved now.

Regards
Sandipan




> Ok, in this case moving to fff from sh to bash would help.
> V.
>
> On Thu, Jun 11, 2015 at 6:53 AM, <sandipan_at_barc.gov.in> wrote:
>
>> Dear sir,
>>
>> Again a big thanks for your kind reply.
>>
>> I think , that I have the link between awk and gawk(/usr/bin/awk-->
>> /etc/alternatives/awk--> /usr/bin/gawk). I have done the
>> update-alternatives and its leading me gawk(auto mode). I have attached
>> the screen shot. And i am not able to remove mawk by any means because
>>
>>
>> dpkg: error processing package mawk (--remove):
>> dependency problems - not removing
>> Errors were encountered while process
>>
>> But till the [[: problem is there.
>>
>> Am i missing something? please help.
>>
>> in anticipation of not bothering you
>>
>> Regards
>> Sandipan
>>
>>
>>
>>
>> > Dear Sandipan, you need to check that the first found awk in the path
>> is
>> > bringing you to gawk.
>> >
>> > This command:
>> > sudo update-alternatives --config awk
>> > Will help you configuring the alternatives for the awk pack.
>> >
>> > This can be achieved also by removing mawk pack with the dpkg command.
>> > Best, V.
>> > On Jun 10, 2015 10:46 AM, <sandipan_at_barc.gov.in> wrote:
>> >
>> >> Dear Sir,
>> >>
>> >> Thank you for your kind reply and sorry to disturb you repeated times
>> .
>> >> but the problem till persists. Though I have installed gawk long time
>> >> ago
>> >> , but till the "[[" error is there. I have attached the screen shot.
>> >>
>> >> And Sir , I have attached my fff script also for your verification ,
>> if
>> >> any other change is required.
>> >>
>> >> Thank you in advance
>> >> Sandipan
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> > Dear Sandipan,
>> >> > without any hesitation I can recommend you to revert the first
>> >> > modification
>> >> > (#!/bin/bash -> #!/bin/sh).
>> >> >
>> >> > There is more than meets the eye in $FLUPRO/flutils/fff (as also in
>> >> the
>> >> > other scrips in $FLUPRO/flutils/), and this modification is indeed
>> >> what
>> >> is
>> >> > causing you the trouble.
>> >> >
>> >> > The "[[" problem is caused by the *awk* flavour/version which is
>> >> installed
>> >> > by default on the Ubuntu's versions - *mawk* -
>> >> > *mawk* conforms only the POSIX standards, on the contrary of the
>> gawk
>> >> > implementation which support also the GNU standards and is more
>> >> commonly
>> >> > used in Linux distributions.
>> >> >
>> >> > A solution to this problem was already posted here.
>> >> > http://www.fluka.org/web_archive/earchive/new-fluka-discuss/6448.html
>> >> >
>> >> > Best,
>> >> > Vittorio
>> >> >
>> >> > On Tue, Jun 9, 2015 at 6:40 AM, <sandipan_at_barc.gov.in> wrote:
>> >> >
>> >> >> Dear Sir,
>> >> >>
>> >> >> Thank you for your kind reply. Actually the problem is same for
>> all
>> >> the
>> >> >> source.f files , even for the model source I got in the forum. I
>> have
>> >> >> attached the sources.
>> >> >>
>> >> >> Just to inform you , I have changed two points of fff script.
>> >> >>
>> >> >> 1. I have changed #!/bin/sh to #!/bin/bash to get rid of [[
>> problem.
>> >> >>
>> >> >> 2. I have changed FLUFOR=gfortran in the script.
>> >> >>
>> >> >> Waiting for your reply.
>> >> >>
>> >> >> Thanks in advance
>> >> >> Sandipan
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> > Dear Sandipan,
>> >> >> > there might be a part of your code (cf252.f) where you use
>> string
>> >> >> > shorted
>> >> >> > than what expected.
>> >> >> > In order to reproduce the issue it would be nice if you could
>> send
>> >> >> over
>> >> >> > your source file (if you can)
>> >> >> > Best,
>> >> >> > Vittorio
>> >> >> >
>> >> >> > On Mon, Jun 8, 2015 at 8:19 AM, <sandipan_at_barc.gov.in> wrote:
>> >> >> >
>> >> >> >>
>> >> >> >> Dear Fluka Experts,
>> >> >> >>
>> >> >> >> I am using Ubuntu 14.04 and installed
>> >> >> >> fluka2011.2c-linux-gfor64bitAA.tar.gz . Now though I am able to
>> >> >> >> successfully compile a source.f card (gfortran compiler)
>> through
>> >> >> flair
>> >> >> >> and
>> >> >> >> executable file is successfully built (FLAIR NOTIFICATION) &
>> >> attached
>> >> >> >> with
>> >> >> >> I/P file , but while running this file is being ignored and
>> output
>> >> is
>> >> >> >> according to the maximum energy put in the beam card only .
>> >> >> >>
>> >> >> >>
>> >> >> >> While running through terminal it gets terminated with
>> following
>> >> >> error
>> >> >> >> ::
>> >> >> >> "At line 25 of file actdline.f Fortran runtime error: Actual
>> >> string
>> >> >> >> length
>> >> >> >> is shorter than the declared one for dummy argument 'card'
>> >> (72/132)".
>> >> >> >> This error is same for all different source.f files.
>> >> >> >>
>> >> >> >> Could you please suggest a solution?
>> >> >> >>
>> >> >> >> Thanks to everyone in the community -
>> >> >> >>
>> >> >> >> Regards
>> >> >> >> Sandipan
>> >> >> >
>> >> >>
>> >> >
>> >>
>> >
>>
>


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Jun 17 2015 - 08:45:51 CEST

This archive was generated by hypermail 2.3.0 : Wed Jun 17 2015 - 08:46:00 CEST