Re: FLUKA: Too big material number
Hi Stefan,
Thanks for pointing out the problem in my inp file. After the correction the
execution went much further, but it still come to a premature stop. The
message gave out was
-------------------
.....
Particle n.: 58 Ecutm (prim. & sec.) = 2.48629999 GeV 2.48629999
GeV, Hthnsz = 1.00000002E+30 GeV
Particle n.: 60 Ecutm (prim. & sec.) = 2.5941 GeV 2.5941
GeV, Hthnsz = 1.00000002E+30 GeV
**** Atomic electron contribution accounted via the Fano correction ****
**** f_Fano = 9.486E+00, Z_Fano = 7.316E+00 ****
**** Isotope tabulation data start at location 14909 and end at
28034 (I*4 addr.) ****
**** Non analog absorption factors start at location 28037 and end
at 28240 (I*4 addr.) ****
**** Biased downscattering factors start at location 28243 and end
at 28446 (I*4 addr.) ****
**** Non analog absorption group limits start at location 28447 and end
at 28548 (I*4 addr.) ****
**** Biased downscattering group limits start at location 28549 and end
at 28650 (I*4 addr.) ****
**** Cut-off group limits start at location 28651 and end at
28752 (I*4 addr.) ****
**** Lower Weight Window limits start at location 28755 and end at
28958 (I*4 addr.) ****
*** Fluka stopped in Xsread: group number disagreement between input and
xsec file ****
*** Nmgp = 72, Nmgp0 = 111, Nmtg = 94, Nmtg0 = 111 ***
-----------------------------
Again I attached my inp file so you may be able to repreduce the message. Is
this something not quite right with the neutron c-s data?
I am also looking for instructions on how to write and make use of users
source.f file. What I want to do is to fire random intial particles on to a
sphere surface, with isotropical direction distribution and energy following
a user supplied histogram. Are there examples or instructions available for
doing such a job?
Regards.
Fan
-------------------------------------------------------------------
Dr. Fan Lei
Space Department, DERA
G081, A8 Building
Farnborough, GU14 0LX
U.K.
Tel . 44-1252-393904
Fax. 44-1252-396330
email: flei@scs.dera.gov.uk
The information contained in this e-mail and any subsequent correspondence is
private and is intended solely for the intended recipient(s). For those other
than the intended recipient any disclosure, copying, distribution, or any
action taken or omitted to be taken in reliance on such information is
prohibited and may be unlawful.
atmos.inp
Partial thread listing: