Hi,
I think that it is enough if you compile source.f with ldpmqmd under
"link" and you will have both executables in one name. Then you can Run
it from the main Flair window.
a
W dniu 2019-05-30 13:59, arghyac_at_barc.gov.in napisał(a):
> Thank you very much for your quick response.
>
> I have compiled source.f (with suppose executable name: "source1")
> I have linked ldpmqmd through FLAIR (FLAIR -- compile -- under "Link"
> section select "ldpmqmd" -- then "build")....it also create a
> executable (suppose with name "test1")
>
> Now I have two executables and in RUN tab which one (among these two)
> I need to select)?
>
>
>
>
>
>
> On 2019-05-30 16:17, amucha_at_agh.edu.pl wrote:
>> Hi,
>> First, compile source.f via "Build" option.
>> Then you need to find the path to the executable ldpmqmd (it should
>> be in ..flutil catalogue) and link it in the main flair window (field
>> "Exe").
>> This command will take your exec from source and run fluka with
>> ldpmqmd.
>> I had the same problem while linking DPMJET3 and source.f routine.
>> Cheers,
>> A
>>
>> W dniu 2019-05-30 11:47, arghyac_at_barc.gov.in napisał(a):
>>> Dear Sir/Madam,
>>> In my simulation I need to put source energy and co-ordinator
>>> through source.f card.
>>> As per FLUKA manual, I need to link ldpmqmd also (as maximum energy
>>> is 250 MeV in the spectrum).
>>>
>>> I have linked ldpmqmd through flair using the steps given in the
>>> following link
>>> http://www.fluka.org/web_archive/earchive/new-fluka-discuss/9784.html
>>> I have compiled the source.f also through FLAIR.
>>>
>>> NOW, I AM NOT ABLE TO LINK BOTH EXECUTABLES (ldpmqmd & SOURCE)
>>> TOGETHER with thw input file in FLAIR.
>>>
>>> Kindly suggest me some method to do the above.
>>>
>>> Thanking you in advance.
>>>
>>> __________________________________________________________________________
>>> You can manage unsubscription from this mailing list at
>>> https://www.fluka.org/fluka.php?id=acc_info
>>
>> __________________________________________________________________________
>> You can manage unsubscription from this mailing list at
>> https://www.fluka.org/fluka.php?id=acc_info
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu May 30 2019 - 15:31:39 CEST