you are using > 400 bodies in the definition of you WATER region. I believe there is a limit and you should split the region to < 400 bodies.
Have you checked your *.out file for errors ?
Kind regards,
Markus
On 19 Sep 2019, at 06:33, Filipa Carvalho <fd.carvalho_at_campus.fct.unl.pt<mailto:fd.carvalho_at_campus.fct.unl.pt>> wrote:
Dear all,
I have been struggling to get this simulation doing what I want. The simulation runs, but when I check, the output file (i.e. 3rdpoint_fibres005_fort.24) it says it only tracked 10^5 particles whereas it should have tracked 10^9. I know this is indeed true because I would expect this simulation to take a lot longer than it's currently taking. I'm guessing there is a problem with geometry but I am not interely sure what. I generated several cilinders using transformation interface (ctrl + T).
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info Received on Thu Sep 19 2019 - 08:01:00 CEST
This archive was generated by hypermail 2.3.0
: Thu Sep 19 2019 - 08:01:05 CEST