[fluka-discuss]: Custom SOURCE doesn't seem to link

From: Matthew Parnell <m.parnell_at_lancaster.ac.uk>
Date: Wed, 15 Apr 2015 16:27:40 +0100

My fellow FLUKA users, I appear to have been stumped, and Google does
not seem to be my friend, and neither does the manual nor online
presentations.

I am required to use a custom SOURCE that I have written, and am having
trouble linking them.

Before we jump to the conclusion that my SOURCE subroutine may have
runtime errors, I have the custom SOURCE my predecessor had used, and am
unable to get it producing anything.

Whilst in my working directory for this project, I have compiled and
linked using:

    $FLUPRO/flutil/fff source.f
    $FLUPRO/flutil/lfluka -o my_fluka -m fluka source.o

There were no errors or warnings in the compilation, however there were
a few warnings in the linking. However I do not think I can do much to
fix them. The output of the lfluka is attached. They seem to suggest to
me 32- and 64-bit variables being accessed when the other was expected.

I then run a single pass to test (including the SOURCE card):

   $FLUPRO/flutil/rfluka -N0 -M1 -e my_fluka TeShielding.inp

This runs for approximately 3s before 'completing', and my scripts
produce a blank figure. The same occurs substituting my predecessors
source for my own.

For comparison, not including the SOURCE card, thus not using the custom
SOURCE subroutine, however still using the linked executable; it runs
for about 11mins which is the same time as the plain rfluka executable.

This is what is shown in the manual to do, am I missing something
fundamental?

-- 
Matthew Parnell
m.parnell_at_lancaster.ac.uk



__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Wed Apr 15 2015 - 19:15:05 CEST

This archive was generated by hypermail 2.3.0 : Wed Apr 15 2015 - 19:15:07 CEST